Chapter 4: Server configuration
Ethernet interface assignments
Use the following table as a guide for assigning server functions to physical Ethernet interfaces.
Table 7: S8700-series Server Ethernet assignments
|
| S8710/S8720/ | S8720/S8730 | S8710/S8720/ | S8720/S8730 |
|
| S8730 hardware | software | S8730 hardware | software |
|
| duplication and | duplication with | duplication with | duplication with |
|
| dedicated control | dedicated control | ||
|
| network | network | control network | control network |
|
|
|
|
|
|
| Control network A | eth0 | eth2 | eth0 | eth2 |
|
|
|
|
|
|
| Control network B | eth3 (if used) | eth3 (if used) | eth3 (if used) | eth3 (if used) |
|
|
|
|
|
|
| LAN | eth4 | eth4 | eth0 | eth2 |
|
|
|
|
|
|
| Duplication Link | eth2 | eth0 | eth2 | eth0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Performing the manual configuration
To configure the server using the manual method:
1.Log into the server and bring up the Integrated Management Maintenance Web Pages.
2.From the Main Menu, under Server Configuration and Upgrades click Configure Server.
3.Click through the Review Notices to get to the Select Method for Configuring Server page.
4.Select "Configure all services using the wizard" and click continue to get to the Set Server Identities page.
5.Fill in the fields on the Set Identities page and subsequent pages:
●Configure Interfaces
●Configure ESS
●Configure Memory (S8720 only)
●Configure Switches
●Set DNS/DHCP
●Set Static Routes
●Configure Time Server
●Set Modem Interface
40 Installing and Configuring the Avaya | January 2008 |