Avaya S8700 manual S8730 LEDs, LEDs on the front panel of the S8730 Server

Chapter 8: Installation verification

S8730 LEDs

Figure 7: LEDs on the front panel of the S8730 Server on page 76 and Figure 8: LEDs on the back panel of the S8730 Server on page 77 show the LEDs on the S8730 Server.

Figure 7: LEDs on the front panel of the S8730 Server

POWER POWER

SUPPLY SUPPLY

8

DIMMSDIMMS

PROC PROC

FANS

	PCI
PPM	RISER
	CAGE

INTER

LOCK

OVER

TEMP

I-PPM

UID 1 2

1	3	5
2	4	6	7

ms873lef LAO 082707

Figure notes:

1.	Active/standby LED	6.	Power on/standby button/system power. Amber means
2.	Internal health		system shut down, but power still applied. Green means
3.	External health		system on. To turn off the power, press and hold the Power
4.	NIC 1 (Eth0) link/activity		button for several seconds.
5.	NIC 2 (Eth1) link/activity	7.	Hard Drive LEDs
		8.	System Insight Display LEDs, which represent the system
			board layout.

Note:

The Active/Standby LED, which is labeled as 1 in Figure 7, is on a push button. When pushed, this button has no effect other than to turn off the LED momentarily. The LED returns to the normal state within a few seconds after the button is pushed.

76 Installing and Configuring the Avaya S8700-Series Server January 2008