Avaya S8700 manual Configuring memory for an S8720 Server

Chapter 4: Server configuration

Configuring memory for an S8720 Server

For an S8720 Server, you must select the memory configuration to be used: either Standard or Extra Large. If Hardware Duplication is turned on, administration for the S8720 in an XL configuration is allowed only if the servers are equipped with DAL2 duplication memory cards.

Note:

If the customer chooses to increase the number of VAL circuit packs or the number of Logged-In Agents, the customer will need to get a new License File with increased capacities.

Note:

If the main servers are S8720 configured as Extra Large (XL), ESSs and LSPs must be configured as XL. See Ensuring ESS and LSP compatibility on page 45.

1.Before configuring the memory, stop Communication Manager by running the bash command stop -acf.

2.From the Maintenance Web Interface, under Server Configuration, click Configure

Server.

3.Click Continue until you get to the Specify how you want to use this wizard page.

4.Select Configure individual services and click Continue.

5.On the main menu under Configure Individual IP Services, click

●Configure Memory (if a main server)

44 Installing and Configuring the Avaya S8700-Series Server January 2008