Chapter 5: IP interface translations
Adding the IPSI to the system
Use the IP Server Interface Administration - Port Network SAT screen to add an IPSI. The information on this screen differs, depending on whether the IP addresses of the IPSI are static or assigned automatically through DHCP.
1.Type add ipserver-interface PNnumber and press Enter.
2.For the Host field and the DHCP ID fields for the primary IPSI and secondary IPSI, if any:
●For dynamic addressing, the DHCP server sets the Host field and the DHCP ID field. Verify that the fields are populated with default data.
●For static addressing, in the Host field, enter the IP address for the IPSI that is listed in the Location field.
add | Page 1 of 1 | |
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 4 | ||
| IP Control? y | Socket Encryption? n |
Ignore Connectivity in Server Arbitration? n | Enable QoS? n | |
| Administer secondary ip server interface board? y | |
Primary IPSI |
|
|
9A01 |
| |
Location: |
| |
Host: |
| |
DHCP ID: |
| |
Secondary IPSI |
| |
| ||
Location: | 9B01 |
|
Host:
DHCP ID:
add
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
| IP Control? y | Socket Encryption? n |
Ignore Connectivity in Server Arbitration? n | Enable QoS? n | |
Primary IPSI | QoS Parameters | |
Location: | 1A01 | Call Control 802.1p: 6 |
Host: | 172.22.22.174 | Call Control DiffServ: 46 |
DHCP ID: |
| |
3. Set the IP Control field to y.
54 Installing and Configuring the Avaya | January 2008 |