Avaya S8700 manual How to use Avaya installation documents

Page 8

Chapter 1: Introduction

How to use Avaya installation documents

Use this document as a guide to install and configure Avaya servers. For information about a particular task, use the index or the table of contents to locate the page on which the information is described. You also need information from other Avaya documents. This section lists those documents and tells you when to use them.

To complete this installation:

●In this document, see:

●

●

-Pre-installation requirements on page 9 first. This section describes the tasks that your must complete at the site before you start the installation.

-Equipment specifications on page 10 for the technical specifications for the hardware.

For how to install and connect the hardware, see Quick Start for Hardware Installation: Avaya S8700-Series Server (555-245-701).

Return to this document and see the remaining sections in the following sequence to install the components of the server. If you are not to install certain components, skip the procedures for those components.

-Configuring the SNMP modules in the UPS on page 23

-Server configuration on page 35

-IP interface translations on page 51

●See the appropriate sections in the following documents to install the port networks and the media gateways:

-Installing the Avaya G650 Media Gateway (03-300144)

-Installation and Configuration for the Avaya G150 Media Gateway (03-300395)

-Quick Start for Hardware Installation: Avaya G250 Media Gateway (03-300433)

-Quick Start for Hardware Installation: Avaya G350 Media Gateway (03-300148)

-Quick Start for Hardware Installation: Avaya G450 Media Gateway (03-602053)

-Installing and Upgrading the Avaya G250 Media Gateway (03-300434)

-Installing and Upgrading the Avaya G350 Media Gateway (03-300394)

-Installing and Upgrading the Avaya G450 Media Gateway (03-602054)

-Quick Start for Hardware Installation: Avaya S8300 Server and Avaya G700 Media Gateway (555-233-150)

-Installation and Upgrade for the Avaya G700 Media Gateway and Avaya S8300 Server (555-234-100)

-Avaya IA 770 INTUITY AUDIX Messaging Application Administering the S8300 and S8400 Servers to work with IA 770

●Return to this document and see:

-IP interface configuration on page 57 to program the IP interface.

8 Installing and Configuring the Avaya S8700-Series Server

January 2008

Image 8

Contents Installing and Configuring the Avaya S8700-Series Server ReleaseAvaya Inc All Rights Reserved Introduction Server configuration Postinstallation administration Index 101 Introduction AudienceHow to use Avaya installation documents Pre-installation requirements Preinstallation tasks to complete at the customer sitePNC license settings for S8700-series Servers Verifying that all the required equipment is on siteEnsuring that the preinstallation tasks are complete Equipment specificationsShows specifications for the S8710, S8720 and S8730 Servers Introduction About server port connections About S8730 Server configurationsAbout RAID S8700-series port connections Figure notes H3df87h2 LAO Hw8730s2 LAO H3df87s2 LAO About modem connections Connecting to collocated serversConnecting to separated servers Modem options About media gatewaysAbout Processor Ethernet About software duplication About SSHIntroduction Snmp configuration Configuring the Snmp modules in the UPSDefault UPS IP addresses for S8700-series Servers Single control Duplicated control Network CNA Network CNBPrerequisites for configuring the Snmp module Security AlertAdministering the Snmp modules Setting selected traps alarmingDefault IP addresses for the Ethernet switch Preparing to configure the Ethernet switch Configuring the Ethernet switch Snmp configuration Communication Manager installation Clearing the ARP cache on the laptopConfiguring Telnet for Windows 2000 and Windows XP Applying power to the serverAccessing the server Installing Avaya Communication Manager Page Server configuration Copying files to the server Opening the Maintenance Web InterfaceCreating a super-user login Select type of authentication section Choose Password Methods of Configuring a serverConfiguring the server manually Maintenance Web Pages configuration screens Methods of Configuring a server Performing the manual configuration S8700-series Server Ethernet assignmentsControl network a Eth0 Eth2 Control network B Eth3 if used Eth4 Eth0 Eth2 Duplication LinkAvaya Installation Wizard About the Avaya Installation WizardClick Launch Avaya Installation Wizard Click Execute PingConfiguring the modem Select Change Modem Setting and click ContinueConfiguring memory for an S8720 Server Click Close Window Ensuring ESS and LSP compatibilitySelect either Standard or Extra Large Enabling firewall settings Enabling network time serversConfiguring the NIC Configuring a second server Accessing the standby serverRelease the server Interchanging serversClick Interchange Interchanging serversPerforming an integrity check on the active server Page IP interface translations Inputting initial system translationsAdding media gateways Cabinet Cabinet DescriptionSet the Ipsi Control of Port Networks field to enabled Enabling the IpsiAdding the Ipsi to the system Type add ipserver-interface PNnumber and press EnterSetting the alarm activation level Enter y in the Enable Operation of Ipsi Duplication fieldEnabling Ipsi duplication duplicated control network only Saving translationsPage Ipsi address configuration IP interface configurationConnecting to the IPSIs Programming the Ipsi for static addressing Connecting the laptop directly to the Ipsi Type show control interface and press Enter Setting the Vlan and diffserv parameters Programming the Ipsi for Dhcp addressing Ipsi LED display for static addressCLK CLK Verifying connectivity to the server Verifying that the IPSIs are translatedUpgrading the Ipsi firmware version if necessary Enabling control of the IPSIsVerifying the license status Postinstallation administration Verifying translationsSetting rules for daylight savings time Type change daylight-savings-rules and press EnterSetting locations if necessary Type change locations and press EnterVerifying the date and the time main server only Clearing and resolving alarms Enabling and disabling the Ethernet switch portsEnabling alarms to Inads by way of a modem Click Submit ChangesEnabling alarms to Inads by way of the Snmp module Backing up files to the compact flash mediaBefore leaving the site Testing the license file Installation verificationTesting the Ipsi circuit pack S8730 LEDs LEDs on the front panel of the S8730 ServerS8710 and S8720 LEDs LEDs on the back panel of the S8730 ServerLEDs on the front panel of the S8710 and the S8720 Servers Additional server LED information LEDs on the back panel of the S8710 and the S8720 ServersAvaya C360 Ethernet switch LEDs LAGLEDs on the Powerware 9125 UPS UPS LEDsTN2312BP Ipsi LEDs TN2312BP Ipsi circuit pack faceplate Ipsi LED display for a static IP address Ipsi services port Connectivity statusPage Appendix a Server access Accessing the command line interface of the server withBackspace key area, select Control-H Connecting to the server directly Ca873srv LAO Cadlsrv2 KLC Connecting to the server remotely over the network Connecting to the server remotely over a modemAccessing the Maintenance Web Interface Finding the IP address of the active serverType of connection Procedure Using the SAT command line promptClick Launch Maintenance Web Interface Select Internet Protocol TCP/IP Logins for Avaya technicians and BusinessPartnersConfiguring the network for Windows 2000 and XP Setting the browser options for Internet Explorer Click on LAN settings, then AdvancedProblem Possible solution Appendix B Installation troubleshootingTroubleshooting the installation of the server hardware Troubleshooting the configuration of the server hardware Ping 192.11.13.6 and press EnterPress Enter Problem Possible solution Index NumericalIpsi Preparing to configure

Related manuals

Manual 20 pages 56.84 Kb

Manual 20 pages 18.09 Kb

Manual 8 pages 16.6 Kb