Avaya S8700 manual Setting locations if necessary, Type change locations and press Enter

Setting locations (if necessary)

Setting locations (if necessary)

After you set the rules for daylight savings time, you must set the locations for all port networks. Port networks can be in different time zones. Use SAT commands to set the locations for the port networks.

1.Type change locations and press Enter.

change locations			LOCATIONS	Page 1 of 5
		ARS Prefix 1 Required For 10-Digit NANP Calls? y
Number	Name	Timezone	Daylight-Savings	Number Plan
1	Main	Offset	Rule	Area Code
		+ 00:00	0
2	CA	- 02:00	0
3		:
4		:
5		:
6		:
7		:
8		:
9		:
10		:
11		:

2.In the ARS Prefix 1 Required for 10-Digit NANP Calls? field, type y.

3.Type the information in the various fields for each media gateway. In the Name field for location 1, type Main.

4.Click Submit to save the changes.

Note:

The location of a port network is defined on the SAT cabinet form (change cabinet X). The location of a network region is defined on the SAT ip-network-regionform (change ip-network-region X). The Location field in the ip-network-regionform is part of the association to the daylight-savings-rule by which a IP phone behaves.

Installing and Configuring the Avaya S8700-Series Server January 2008 69