Avaya S8700 manual Verifying connectivity to the server, Verifying that the IPSIs are translated

Verifying connectivity to the server

Verifying connectivity to the server

1.Open the Maintenance Web Interface and log in as craft.

2.Under Diagnostics, click Ping and select Other server(s), All IPSIs, UPS(s), Ethernet switches to verify connectivity to these units.

3.Click Execute Ping.

4.Verify that all endpoints respond correctly.

Verifying that the IPSIs are translated

Note:

You must be on the active server to use SAT commands.

1.Use SSH to open a SAT session on the server.

2.Type list ipserver-interface and press Enter.

3.Verify that all ISPI circuit packs are translated.

Upgrading the IPSI firmware version (if necessary)

You might need to upgrade the firmware on some or all the IPSIs. All IPSIs must have the same firmware load.

1.On the Maintenance Web Interface under IPSI Firmware Upgrades, click IPSI Version.

2.Select Query All and click View.

3.Verify the firmware release for each IPSI.

4.If an upgrade is required, follow the procedures in Firmware Download Procedures at the Download Center on the Avaya Support web site.

Enabling control of the IPSIs

1. Ensure that the IPSIs have the same, current firmware.

Installing and Configuring the Avaya S8700-Series Server January 2008 65