Power Supply Module Features And Indicators
NOTE: Your storage array is shipped with two IEC C19 to C20 jumper cords. Connect the C19 plug to the array's power supplies and the C20 plug to the power distribution unit (PDU) in the rack cabinet.
Figure 6. Power Supply Module Features and Status Indicators
Item | Indicator or Connector Icon | Description |
|
|
|
| |
1 | Power connector | Connect the external power supply source to this | |
|
| connector. |
|
2 | Power switch | The power switch controls the power supply | |
|
| output to the system. |
|
3 | Standby power indicator | The standby power indicator lights green when the | |
|
| system is in standby mode and the main power is | |
|
| off. |
|
4 | DC power indicator | Green | Indicates that DC output |
|
| ||
|
|
| voltage is within the limit. |
|
| Off | Indicates that DC output |
|
|
| voltage is not within the |
|
|
| limit. |
5Service action allowed indicator
CAUTION: Remove the power supply module from the system only if the service action allowed indicator lights blue. Removing the power supply module from the system when the service action allowed indicator is off may damage the system.
Blue | Indicates that you can safely |
| remove the power supply |
| module from the system. |
12