Dell E08J Series owner manual Installing a RAID Controller Module Or Expansion Module

Figure 22. Removing and Installing a RAID Controller Module or Expansion Module

1.	RAID controller module or expansion	2. release lever
	module
3.	release tab

Installing A RAID Controller Module Or Expansion Module

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Insert the RAID controller module or expansion module into the bay until it seats into place.

2.Push the release lever toward the chassis until it clicks into place.

3.Connect all the cables and SFP+ modules to the RAID controller module or expansion module.

4.Using the MDSM, verify that the new RAID controller module or expansion module is identified.

5.If applicable, update the firmware for the RAID controller module or expansion module. For information about the latest firmware, see dell.com/support.

35