Dell E08J Series owner manual Installing The Physical-Disk Drawer

Figure 15. Removing and Installing the Physical-Disk Drawer

1. physical-disk drawer 2. release tab

Installing The Physical-Disk Drawer

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Align the physical-disk drawer with the slot on the chassis.

2.Slide the physical-disk drawer into the chassis until it is seated properly and the release tabs snap into place.

3.Install the physical disks row wise into the physical-disk drawer.

NOTE: Using the note that you saved while removing the physical-disk drawer, install the physical disks to the same location in the physical-disk drawer that they were in.

4.Close the physical-disk drawer.

5.Install the SAS chain cables.

NOTE: Make sure all the SAS chain cables are firmly connected to all the drawers.

26