Dell E08J Series owner manual Tested

Page 53

Environmental

NOTE: For additional information about environmental measurements for specific system

configurations, see dell.com/environmental_datasheets.

Temperature

 

Operating

Continuous operation: 10 °C to 35 °C (50 °F to 95 °F) at

 

20% to 80% relative humidity (RH), with 26 °C

 

maximum dew point. De-rate maximum allowable dry

 

bulb temperature at 1 °C/300 m (1 °F per 550 ft) above

 

900 m (2952.75 ft).

 

NOTE: For information on supported expanded

 

operating temperature range and configurations,

 

see the Owner's Manual at dell.com/support/

 

manuals.

Storage

–40 °C to 65 °C (–40 °F to 149 °F) with a maximum

 

temperature gradation of 20 °C per hour

Relative humidity

 

Operating

20% to 80% (noncondensing) with maximum humidity

 

gradation of 10% per hour

Storage

5% to 95% at a maximum wet bulb temperature of 38

 

°C (100.4 °F)

Maximum vibration

 

Operating

0.26 Grms at 5 Hz to 350 Hz in operational orientation

Storage

1.88 Grms at 10 Hz to 500 Hz for 15 minutes (all six sides

 

tested)

Maximum shock

 

Operating

Storage

One shock pulse in the positive z axis of the system at 31 G for 2.6 ms in the operational orientation

Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) at 71 G for up to 2 ms

Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 22 G faired square wave pulse with velocity change at 200 inches/second (508 centimeters/second)

Altitude

 

Operating

Maximum 3000 m (9,842 ft)

Storage

Maximum 12192 m (40,000 ft)

Airborne contaminant level

 

Class

G1 as defined by ISA-S71.04-1985

53

Image 53
Contents Dell PowerVault MD3860f Storage Arrays Page Contents Troubleshooting your system Technical Specifications Getting help Related Documentation Dell PowerVault Modular Disk Storage ManagerIntroduction Front-Panel Features Front-Panel FeaturesFront-Bezel Indicators Front-Panel IndicatorsBlue Back-Panel Features Back-Panel FeaturesCooling Fan Module Indicators Cooling Fan Module LED Indicator CodesPower Supply Module Features and Status Indicators Power Supply Module Features And IndicatorsPhysical-Disk LED Indicators Physical-Disk LED IndicatorsFrom the system RAID Controller Modules Controller ModulesHost Channel LED Link Rate Indications Fibre Optic Cable Connection SFP+ Transceivers Fibre Optic And SAS CablesExpansion Controller Modules MD3060e Expansion Module Features And IndicatorsStorage Array Thermal Shutdown RAID Controller Module-Additional FeaturesBattery Backup Unit System Password Reset Recommended Tools Removing And Installing The Front BezelInstalling The Front Bezel Removing The Front Bezel Service Action Allowed Indicator LEDPhysical-Disk Drawers Inside the Physical-Disk Drawer Opening The Physical-Disk DrawerRemoving The Physical-Disk Drawer Closing The Physical-Disk DrawerPage Removing and Installing the Physical-Disk Drawer Installing The Physical-Disk DrawerRemoving a Physical Disk From a Physical-Disk Carrier Physical Disk Installation GuidelinesPhysical Disks Inch physical drive cage Guide pin Release handle Installing a Physical Disk In a Physical-Disk Carrier Removing a Physical Disk From a Physical-Disk Drawer SAS Chain Cables Installing a Physical Disk In a Physical-Disk DrawerRemoving The SAS Chain Cables Removing and Installing the SAS Chain Cables Installing The SAS Chain CablesRemoving a RAID Controller Module Or Expansion Module Installing a RAID Controller Module Or Expansion Module Closing The RAID Controller Module Opening The RAID Controller ModuleReplacing the SFP+ Transceiver Replacing The SFP+ TransceiverRemoving The RAID Controller Module Backup Battery Unit RAID Controller Module Backup Battery UnitRemoving a Power Supply Module Power SuppliesInstalling The RAID Controller Module Backup Battery Unit Removing and Installing the power supply module Installing a Power Supply ModuleRemoving a Cooling Fan Module Cooling Fan ModulesRemoving and Installing the Cooling Fan Module Installing a Cooling Fan ModuleTroubleshooting An SFP+ Transceiver Troubleshooting Loss Of CommunicationRemoving an SFP+ Module Troubleshooting Power Supply Modules Troubleshooting External ConnectionsTroubleshooting Expansion Enclosure Management Modules Troubleshooting Array Cooling ProblemsTroubleshooting Physical Disks Troubleshooting RAID Controller ModulesIf The Link Status LEDs Are Not Green If Both LEDs For Any Given FC in Port Are UnlitTroubleshooting a Wet Storage Array Troubleshooting Array And Expansion Enclosure ConnectionsController Failure Conditions Troubleshooting a Damaged ArrayCritical Conditions Noncritical ConditionsInvalid Storage Array ECC ErrorsPCI Errors Technical Specifications Page Tested Page Documentation feedback Locating your system service tagContacting Dell