Cisco Systems UCSCPCIECSC02 manual Name

Page 15

Managing Network Adapters

	Modifying vHBA Properties
Name	Description
FLOGI Retries field	The number of times that the system tries to log in to the fabric after
	the first failure.
	To specify an unlimited number of retries, select the INFINITE radio
	button. Otherwise select the second radio button and enter an integer
	into the corresponding field.
FLOGI Timeout field	The number of milliseconds that the system waits before it tries to log
	in again.
	Enter an integer between 1,000 and 255,000.
Step 13 In the Fibre Channel Port PLOGI area, update the following fields:
Name	Description
PLOGI Retries field	The number of times that the system tries to log in to a port after the
	first failure.
	Enter an integer between 0 and 255.
PLOGI Timeout field	The number of milliseconds that the system waits before it tries to log
	in again.

Enter an integer between 1,000 and 255,000.

Step 14 In the SCSI I/O area, update the following fields:

Name	Description

CDB Transmit Queue Count	The number of SCSI I/O queue resources the system should allocate.
field	Enter an integer between 1 and 8.
	Enter an integer between 1 and 8.

CDB Work Queue Ring Size field The number of descriptors in each SCSI I/O queue.

Enter an integer between 64 and 512.

Step 15 In the Receive/Transmit Queues area, update the following fields:

Name	Description
FC Work Queue Ring Size field	The number of descriptors in each transmit queue.

Enter an integer between 64 and 128.

FC Receive Queue Ring Size field The number of descriptors in each receive queue.

Enter an integer between 64 and 128.

Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4

OL-23489-08

15

Image 15

Contents

Overview of the Cisco UCS C-Series Network Adapters Managing Network AdaptersCisco UCS P81E Virtual Interface Card Viewing Network Adapter PropertiesSerial Number column Cimc Management EnabledPCI Slot column Product Name columnFault Configuration Pending fieldFIP Mode field NIV Mode fieldConfiguring Adapter Properties Enable FIP Mode check box Enable NIV Mode check box Number of VM FEX InterfacesClick Save Changes Name field Managing vHBAsGuidelines for Managing vHBAs Viewing vHBA PropertiesClass of Service drop-down list FC SAN Boot check boxEnable Persistent LUN Binding Default Vlan fieldRatov field Enable FCP Error RecoveryLink Down Timeout field Port Down Timeout fieldLUNs per Target field Interrupt Mode drop-down listFlogi Timeout field Throttle Count field Modifying vHBA Properties World Wide Node Name field Error Recovery area, update the following fields Fibre Channel Interrupt area, update the following fields Name Click Add vHBA Creating a vHBAFc1 VHBA Boot TableCreating a Boot Table Entry Deleting a vHBAVHBA Persistent Binding Deleting a Boot Table EntryViewing Persistent Bindings Managing vNICs Rebuilding Persistent BindingsGuidelines for Managing vNICs Viewing vNIC Properties Trust Host CoS check boxPCI Order field Enable PXE Boot check box Enable Uplink Failover check boxFailback Timeout field Receive Queue Count field Interrupt Count fieldCoalescing Time field Coalescing Type drop-down listTransmit Queue Ring Size field Enable TCP Rx OffloadEnable TCP Tx Offload Enable Large Receive check boxModifying vNIC Properties Enable TCP-IPv6 Extension RSSAccess Ethernet Interrupt area, update the following fields Ethernet Transmit Queue area, update the following fields Enable TCP Receive Side Scaling Click Add vNIC Creating a vNICViewing Virtual FEX Properties Managing VM FEXDeleting a vNIC Virtual Machine Fabric ExtenderUplink Failover column Vlan Mode columnPXE Boot field Properties buttonCoalescing Type field Interrupt Mode fieldEnable TCP-IPv4 RSS field Enable TCP SegmentationEnable Large Receive field Enable IPv4 RSS fieldTftp Server IP Address field Backing Up and Restoring the Adapter ConfigurationExporting the Adapter Configuration Click Export ConfigurationImporting the Adapter Configuration Restoring Adapter DefaultsClick Import Configuration Installing Adapter Firmware From a Local File Managing Adapter FirmwareAdapter Firmware Install Firmware button Installing Adapter Firmware From a Tftp ServerActivating Adapter Firmware Resetting the AdapterOL-23489-08

Related manuals

Manual 204 pages 40.67 Kb