Cisco Systems UCSCPCIECSC02 manual Deleting a Boot Table Entry, VHBA Persistent Binding

Managing Network Adapters

Deleting a Boot Table Entry

	Name	Description
	Target WWPN field	The World Wide Port Name (WWPN) that corresponds to the location
		of the boot image.
		Enter the WWPN in the format hh:hh:hh:hh:hh:hh:hh:hh.
	LUN ID field	The LUN ID that corresponds to the location of the boot image.
		Enter an ID between 0 and 255.
	Add Boot Entry button	Adds the specified location to the boot table.
	Reset Values button	Clears the values currently entered in the fields.
	Cancel button	Closes the dialog box without saving any changes made while the dialog
		box was open.
Step 10 Click Add Boot Entry.

Deleting a Boot Table Entry

Procedure

Step 1 In the Navigation pane, click the Server tab.

Step 2 On the Server tab, click Inventory.

Step 3 In the Inventory pane, click the Network Adapters tab.

Step 4 In the Adapter Cards area, select the adapter card.

If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the Adapter Cards area.

Step 5 In the tabbed menu below the Adapter Cards area, click the vHBAs tab.

Step 6 In the Host Fibre Channel Interfaces area, select a vHBA from the table.

Step 7 Click Boot Table to open the Boot Table dialog box for the selected vHBA.

Step 8 In the Boot Table dialog box, click the entry to be deleted.

Step 9 Click Delete and click OK to confirm.

vHBA Persistent Binding

Persistent binding ensures that the system-assigned mapping of Fibre Channel targets is maintained after a reboot.

	Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
18	OL-23489-08