Cisco Systems UCSCPCIECSC02 manual Error Recovery area, update the following fields

Managing Network Adapters

Modifying vHBA Properties

Name	Description
Rate Limit field	The data rate limit for traffic on this vHBA, in Mbps.
	If you want this vHBA to have an unlimited data rate, select OFF.
	Otherwise, click the second radio button and enter an integer between
	1 and 10,000.
	Note	This option cannot be used in NIV
		mode.
PCIe Device Order field	The order in which this vHBA will be used.
	To let the system set the order, select ANY. To specify an order, select
	the second radio button and enter an integer between 0 and 17.
EDTOV field	The error detect timeout value (EDTOV), which is the number of
	milliseconds to wait before the system assumes that an error has
	occurred.
	Enter an integer between 1,000 and 100,000. The default is 2,000
	milliseconds.
RATOV field	The resource allocation timeout value (RATOV), which is the number
	of milliseconds to wait before the system assumes that a resource cannot
	be properly allocated.
	Enter an integer between 5,000 and 100,000. The default is 10,000
	milliseconds.
Max Data Field Size field	The maximum size of the Fibre Channel frame payload bytes that the
	vHBA supports.
	Enter an integer between 256 and 2112.
Channel Number field	The channel number that will be assigned to this vHBA.
	Enter an integer between 1 and 1,000.
	Note	NIV mode is required for this
		option.
Port Profile drop-down list	The port profile that should be associated with the vHBA, if any.
	This field displays the port profiles defined on the switch to which this
	server is connected.
	Note	NIV mode is required for this
		option.
Step 9 In the Error Recovery area, update the following fields:
Name	Description
Enable FCP Error Recovery	If checked, the system uses FCP Sequence Level Error Recovery
check box	protocol (FC-TAPE).

Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4

OL-23489-08 13