Cisco Systems UCSCPCIECSC02 manual Ratov field, Max Data Field Size field, Channel Number field

Managing Network Adapters

Viewing vHBA Properties

Name	Description
RATOV field	The resource allocation timeout value (RATOV), which is the number
	of milliseconds to wait before the system assumes that a resource cannot
	be properly allocated.
	Enter an integer between 5,000 and 100,000. The default is 10,000
	milliseconds.
Max Data Field Size field	The maximum size of the Fibre Channel frame payload bytes that the
	vHBA supports.
	Enter an integer between 256 and 2112.
Channel Number field	The channel number that will be assigned to this vHBA.
	Enter an integer between 1 and 1,000.
	Note	NIV mode is required for this
		option.
Port Profile drop-down list	The port profile that should be associated with the vHBA, if any.
	This field displays the port profiles defined on the switch to which this
	server is connected.
	Note	NIV mode is required for this
		option.

Step 9 In the Error Recovery area, review the information in the following fields:

Name	Description
Enable FCP Error Recovery	If checked, the system uses FCP Sequence Level Error Recovery
check box	protocol (FC-TAPE).
Link Down Timeout field	The number of milliseconds the uplink port should be offline before it
	informs the system that the uplink port is down and fabric connectivity
	has been lost.
	Enter an integer between 0 and 240,000.
Port Down I/O Retries field	The number of times an I/O request to a port is returned because the
	port is busy before the system decides the port is unavailable.
	Enter an integer between 0 and 255.
Port Down Timeout field	The number of milliseconds a remote Fibre Channel port should be
	offline before informing the SCSI upper layer that the port is unavailable.
	Enter an integer between 0 and 240,000.

Step 10 In the Fibre Channel Interrupt area, review the information in the following fields:

Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4

OL-23489-08 9