Cisco Systems UCSCPCIECSC02 manual Managing vNICs, Rebuilding Persistent Bindings

Page 20

Managing Network Adapters

Rebuilding Persistent Bindings

Rebuilding Persistent Bindings

Procedure

Step 1 In the Navigation pane, click the Server tab.

Step 2 On the Server tab, click Inventory.

Step 3 In the Inventory pane, click the Network Adapters tab.

Step 4 In the Adapter Cards area, select the adapter card.

If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the Adapter Cards area.

Step 5 In the tabbed menu below the Adapter Cards area, click the vHBAs tab.

Step 6 In the Host Fibre Channel Interfaces area, select a vHBA from the table.

Step 7 Click Persistent Bindings to open the Persistent Bindings dialog box for the selected vHBA. Step 8 In the Persistent Bindings dialog box for the selected vHBA, click Rebuild Persistent Bindings. Step 9 Click Close.

Managing vNICs

Guidelines for Managing vNICs

When managing vNICs, consider the following guidelines and restrictions:

•The Cisco UCS P81E Virtual Interface Card and Cisco UCS VIC1225 Virtual Interface Card provide two default vNICs (eth0 and eth1). You can create up to 16 additional vNICs on these adapter cards.

Note If Network Interface Virtualization (NIV) mode is enabled for the adapter, you must assign a channel number to a vNIC when you create it.

• After making configuration changes, you must reboot the host for settings to take effect.

	Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
20	OL-23489-08

Image 20

Contents Managing Network Adapters Overview of the Cisco UCS C-Series Network AdaptersViewing Network Adapter Properties Cisco UCS P81E Virtual Interface CardCimc Management Enabled PCI Slot columnProduct Name column Serial Number columnConfiguration Pending field FIP Mode fieldNIV Mode field FaultConfiguring Adapter Properties Click Save Changes Enable FIP Mode check boxEnable NIV Mode check box Number of VM FEX Interfaces Managing vHBAs Guidelines for Managing vHBAsViewing vHBA Properties Name fieldFC SAN Boot check box Enable Persistent LUN BindingDefault Vlan field Class of Service drop-down listEnable FCP Error Recovery Link Down Timeout fieldPort Down Timeout field Ratov fieldInterrupt Mode drop-down list Flogi Timeout fieldThrottle Count field LUNs per Target fieldModifying vHBA Properties World Wide Node Name field Error Recovery area, update the following fields Fibre Channel Interrupt area, update the following fields Name Creating a vHBA Click Add vHBAVHBA Boot Table Creating a Boot Table EntryDeleting a vHBA Fc1Deleting a Boot Table Entry VHBA Persistent BindingViewing Persistent Bindings Guidelines for Managing vNICs Managing vNICsRebuilding Persistent Bindings PCI Order field Viewing vNIC PropertiesTrust Host CoS check box Failback Timeout field Enable PXE Boot check boxEnable Uplink Failover check box Interrupt Count field Coalescing Time fieldCoalescing Type drop-down list Receive Queue Count fieldEnable TCP Rx Offload Enable TCP Tx OffloadEnable Large Receive check box Transmit Queue Ring Size fieldEnable TCP-IPv6 Extension RSS Modifying vNIC PropertiesAccess Ethernet Interrupt area, update the following fields Ethernet Transmit Queue area, update the following fields Enable TCP Receive Side Scaling Creating a vNIC Click Add vNICManaging VM FEX Deleting a vNICVirtual Machine Fabric Extender Viewing Virtual FEX PropertiesVlan Mode column PXE Boot fieldProperties button Uplink Failover columnInterrupt Mode field Coalescing Type fieldEnable TCP Segmentation Enable Large Receive fieldEnable IPv4 RSS field Enable TCP-IPv4 RSS fieldBacking Up and Restoring the Adapter Configuration Exporting the Adapter ConfigurationClick Export Configuration Tftp Server IP Address fieldClick Import Configuration Importing the Adapter ConfigurationRestoring Adapter Defaults Adapter Firmware Installing Adapter Firmware From a Local FileManaging Adapter Firmware Installing Adapter Firmware From a Tftp Server Install Firmware buttonResetting the Adapter Activating Adapter FirmwareOL-23489-08

Related manuals

Manual 204 pages 40.67 Kb