Cisco Systems UCSCPCIECSC02 manual Configuring Adapter Properties

Page 5

Managing Network Adapters

Configuring Adapter Properties

Name	Description
Running Version field	The firmware version that is currently active.
Backup Version field	The alternate firmware version installed on the adapter, if any. The
	backup version is not currently running. To activate it, administrators
	can click Activate Firmware in the Actions area.
	Note	When you install new firmware on the adapter, any existing
		backup version is deleted and the new firmware becomes the
		backup version. You must manually activate the new firmware
		if you want the adapter to run the new version.
Startup Version field	The firmware version that will become active the next time the adapter
	is rebooted.
Bootloader Version field	The bootloader version associated with the adapter card.
Status field	The status of the last firmware activation that was performed on this
	adapter.
	Note	The status is reset each time the adapter is
		rebooted.

What to Do Next

To view the properties of virtual NICs, VM FEXs, and virtual HBAs, see the following sections:

•Viewing vNIC Properties, on page 21

•Viewing Virtual FEX Properties, on page 31

•Viewing vHBA Properties, on page 7

Configuring Adapter Properties

Before You Begin

•You must log in with admin privileges to perform this task.

•A supported Virtual Interface Card (VIC) must be installed in the chassis and the server must be powered on.

Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4

OL-23489-08

5

Image 5

Contents Overview of the Cisco UCS C-Series Network Adapters Managing Network AdaptersCisco UCS P81E Virtual Interface Card Viewing Network Adapter PropertiesPCI Slot column Cimc Management EnabledProduct Name column Serial Number columnFIP Mode field Configuration Pending fieldNIV Mode field FaultConfiguring Adapter Properties Click Save Changes Enable FIP Mode check boxEnable NIV Mode check box Number of VM FEX Interfaces Guidelines for Managing vHBAs Managing vHBAsViewing vHBA Properties Name fieldEnable Persistent LUN Binding FC SAN Boot check boxDefault Vlan field Class of Service drop-down listLink Down Timeout field Enable FCP Error RecoveryPort Down Timeout field Ratov fieldFlogi Timeout field Interrupt Mode drop-down listThrottle Count field LUNs per Target fieldModifying vHBA Properties World Wide Node Name field Error Recovery area, update the following fields Fibre Channel Interrupt area, update the following fields Name Click Add vHBA Creating a vHBACreating a Boot Table Entry VHBA Boot TableDeleting a vHBA Fc1VHBA Persistent Binding Deleting a Boot Table EntryViewing Persistent Bindings Guidelines for Managing vNICs Managing vNICsRebuilding Persistent Bindings PCI Order field Viewing vNIC PropertiesTrust Host CoS check box Failback Timeout field Enable PXE Boot check boxEnable Uplink Failover check box Coalescing Time field Interrupt Count fieldCoalescing Type drop-down list Receive Queue Count fieldEnable TCP Tx Offload Enable TCP Rx OffloadEnable Large Receive check box Transmit Queue Ring Size fieldModifying vNIC Properties Enable TCP-IPv6 Extension RSSAccess Ethernet Interrupt area, update the following fields Ethernet Transmit Queue area, update the following fields Enable TCP Receive Side Scaling Click Add vNIC Creating a vNICDeleting a vNIC Managing VM FEXVirtual Machine Fabric Extender Viewing Virtual FEX PropertiesPXE Boot field Vlan Mode columnProperties button Uplink Failover columnCoalescing Type field Interrupt Mode fieldEnable Large Receive field Enable TCP SegmentationEnable IPv4 RSS field Enable TCP-IPv4 RSS fieldExporting the Adapter Configuration Backing Up and Restoring the Adapter ConfigurationClick Export Configuration Tftp Server IP Address fieldClick Import Configuration Importing the Adapter ConfigurationRestoring Adapter Defaults Adapter Firmware Installing Adapter Firmware From a Local FileManaging Adapter Firmware Install Firmware button Installing Adapter Firmware From a Tftp ServerActivating Adapter Firmware Resetting the AdapterOL-23489-08

Related manuals

Manual 204 pages 40.67 Kb