Cisco Systems UCSCPCIECSC02 manual Importing the Adapter Configuration, Restoring Adapter Defaults

Page 36

Managing Network Adapters

Importing the Adapter Configuration

Importing the Adapter Configuration

Procedure

Step 1 In the Navigation pane, click the Server tab.

Step 2 On the Server tab, click Inventory.

Step 3 In the Inventory pane, click the Network Adapters tab.

Step 4 In the Adapter Cards area, select the adapter card.

If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the Adapter Cards area.

Step 5 In the tabbed menu below the Adapter Cards area, click the General tab.

Step 6 In the Actions area of the General tab, click Import Configuration.

The Import Adapter Configuration dialog box opens.

Step 7 In the Import Adapter Configuration dialog box, update the following fields:

Name	Description
TFTP Server IP Address field	The IP address of the TFTP server on which the adapter configuration
	file resides.
Path and Filename field	The path and filename of the configuration file on the TFTP server.

Step 8 Click Import Configuration.

The adapter downloads the configuration file from the specified path on the TFTP server at the specified IP address. The configuration will be installed during the next server reboot.

What to Do Next

Reboot the server to apply the imported configuration.

Restoring Adapter Defaults

Procedure

Step 1 In the Navigation pane, click the Server tab.

Step 2 On the Server tab, click Inventory.

Step 3 In the Inventory pane, click the Network Adapters tab.

Step 4 In the Adapter Cards area, select the adapter card.

If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the Adapter Cards area.

	Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
36	OL-23489-08

Image 36

Contents Managing Network Adapters Overview of the Cisco UCS C-Series Network AdaptersViewing Network Adapter Properties Cisco UCS P81E Virtual Interface CardCimc Management Enabled PCI Slot columnProduct Name column Serial Number columnConfiguration Pending field FIP Mode fieldNIV Mode field FaultConfiguring Adapter Properties Enable FIP Mode check box Enable NIV Mode check box Number of VM FEX InterfacesClick Save Changes Managing vHBAs Guidelines for Managing vHBAsViewing vHBA Properties Name fieldFC SAN Boot check box Enable Persistent LUN BindingDefault Vlan field Class of Service drop-down listEnable FCP Error Recovery Link Down Timeout fieldPort Down Timeout field Ratov fieldInterrupt Mode drop-down list Flogi Timeout fieldThrottle Count field LUNs per Target fieldModifying vHBA Properties World Wide Node Name field Error Recovery area, update the following fields Fibre Channel Interrupt area, update the following fields Name Creating a vHBA Click Add vHBAVHBA Boot Table Creating a Boot Table EntryDeleting a vHBA Fc1Deleting a Boot Table Entry VHBA Persistent BindingViewing Persistent Bindings Managing vNICs Rebuilding Persistent BindingsGuidelines for Managing vNICs Viewing vNIC Properties Trust Host CoS check boxPCI Order field Enable PXE Boot check box Enable Uplink Failover check boxFailback Timeout field Interrupt Count field Coalescing Time fieldCoalescing Type drop-down list Receive Queue Count fieldEnable TCP Rx Offload Enable TCP Tx OffloadEnable Large Receive check box Transmit Queue Ring Size fieldEnable TCP-IPv6 Extension RSS Modifying vNIC PropertiesAccess Ethernet Interrupt area, update the following fields Ethernet Transmit Queue area, update the following fields Enable TCP Receive Side Scaling Creating a vNIC Click Add vNICManaging VM FEX Deleting a vNICVirtual Machine Fabric Extender Viewing Virtual FEX PropertiesVlan Mode column PXE Boot fieldProperties button Uplink Failover columnInterrupt Mode field Coalescing Type fieldEnable TCP Segmentation Enable Large Receive fieldEnable IPv4 RSS field Enable TCP-IPv4 RSS fieldBacking Up and Restoring the Adapter Configuration Exporting the Adapter ConfigurationClick Export Configuration Tftp Server IP Address fieldImporting the Adapter Configuration Restoring Adapter DefaultsClick Import Configuration Installing Adapter Firmware From a Local File Managing Adapter FirmwareAdapter Firmware Installing Adapter Firmware From a Tftp Server Install Firmware buttonResetting the Adapter Activating Adapter FirmwareOL-23489-08

Related manuals

Manual 204 pages 40.67 Kb