Cisco Systems UCSCPCIECSC02 manual Installing Adapter Firmware From a Tftp Server

Page 38

Managing Network Adapters

Installing Adapter Firmware From a TFTP Server

Installing Adapter Firmware From a TFTP Server

Procedure

Step 1 In the Navigation pane, click the Server tab.

Step 2 On the Server tab, click Inventory.

Step 3 In the Inventory pane, click the Network Adapters tab.

Step 4 In the Adapter Cards area, select the adapter card.

If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the Adapter Cards area.

Step 5 In the tabbed menu below the Adapter Cards area, click the General tab.

Step 6 In the Actions area of the General tab, click Install Firmware to open the Install Adapter Firmware dialog box.

Step 7 In the Install Adapter Firmware dialog box, select Install from TFTP server, then click Next. Step 8 In the Install Adapter Firmware dialog box, update the following fields:

	Name	Description
	TFTP Server IP Address field	The IP address of the TFTP server on which the adapter configuration
		file resides.
	Path and Filename field	The path and filename of the configuration file on the TFTP server.
	Back button	Click this button if you want to specify a local path for the firmware
		package.
	Install Firmware button	Click this button to install the selected firmware package in the adapter's
		backup memory slot.
	Close button	Click this button to close the wizard without making any changes to the
		firmware versions stored on the server.
Step 9 Click Install Firmware.

What to Do Next

To activate the new firmware, see Activating Adapter Firmware.

	Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
38	OL-23489-08

Image 38

Contents

Managing Network Adapters Overview of the Cisco UCS C-Series Network AdaptersViewing Network Adapter Properties Cisco UCS P81E Virtual Interface CardProduct Name column Cimc Management EnabledPCI Slot column Serial Number columnNIV Mode field Configuration Pending fieldFIP Mode field FaultConfiguring Adapter Properties Click Save Changes Enable FIP Mode check boxEnable NIV Mode check box Number of VM FEX Interfaces Viewing vHBA Properties Managing vHBAsGuidelines for Managing vHBAs Name fieldDefault Vlan field FC SAN Boot check boxEnable Persistent LUN Binding Class of Service drop-down listPort Down Timeout field Enable FCP Error RecoveryLink Down Timeout field Ratov fieldThrottle Count field Interrupt Mode drop-down listFlogi Timeout field LUNs per Target fieldModifying vHBA Properties World Wide Node Name field Error Recovery area, update the following fields Fibre Channel Interrupt area, update the following fields Name Creating a vHBA Click Add vHBADeleting a vHBA VHBA Boot TableCreating a Boot Table Entry Fc1Deleting a Boot Table Entry VHBA Persistent BindingViewing Persistent Bindings Guidelines for Managing vNICs Managing vNICsRebuilding Persistent Bindings PCI Order field Viewing vNIC PropertiesTrust Host CoS check box Failback Timeout field Enable PXE Boot check boxEnable Uplink Failover check box Coalescing Type drop-down list Interrupt Count fieldCoalescing Time field Receive Queue Count fieldEnable Large Receive check box Enable TCP Rx OffloadEnable TCP Tx Offload Transmit Queue Ring Size fieldEnable TCP-IPv6 Extension RSS Modifying vNIC PropertiesAccess Ethernet Interrupt area, update the following fields Ethernet Transmit Queue area, update the following fields Enable TCP Receive Side Scaling Creating a vNIC Click Add vNICVirtual Machine Fabric Extender Managing VM FEXDeleting a vNIC Viewing Virtual FEX PropertiesProperties button Vlan Mode columnPXE Boot field Uplink Failover columnInterrupt Mode field Coalescing Type field Enable IPv4 RSS field Enable TCP Segmentation Enable Large Receive field Enable TCP-IPv4 RSS fieldClick Export Configuration Backing Up and Restoring the Adapter ConfigurationExporting the Adapter Configuration Tftp Server IP Address fieldClick Import Configuration Importing the Adapter ConfigurationRestoring Adapter Defaults Adapter Firmware Installing Adapter Firmware From a Local FileManaging Adapter Firmware Installing Adapter Firmware From a Tftp Server Install Firmware buttonResetting the Adapter Activating Adapter FirmwareOL-23489-08

Related manuals

Manual 204 pages 40.67 Kb