Cisco Systems UCSCPCIECSC02 World Wide Port Name field, FC SAN Boot check box, Uplink Port field

Name

Description

World Wide Port Name field

The WWPN associated with the vHBA.

To let the system generate the WWPN, select AUTO. To specify a

WWPN, click the second radio button and enter the WWPN in the

corresponding field.

FC SAN Boot check box

If checked, the vHBA can be used to perform a SAN boot.

Enable Persistent LUN Binding

If checked, any LUN ID associations are retained in memory until they

check box

are manually cleared.

Uplink Port field

The uplink port associated with the vHBA.

Note

This value cannot be changed for the system-defined vHBAs

fc0 and fc1.

MAC Address field

The MAC address associated with the vHBA.

To let the system generate the MAC address, select AUTO. To specify

an address, click the second radio button and enter the MAC address in

the corresponding field.

Default VLAN field

If there is no default VLAN for this vHBA, click NONE. Otherwise,

click the second radio button and enter a VLAN ID between 1 and 4094

in the field.

Class of Service drop-down list

The CoS for the vHBA.

Select an integer between 0 and 6, with 0 being lowest priority and 6

being the highest priority.

Note

This option cannot be used in NIV

mode.

Rate Limit field

The data rate limit for traffic on this vHBA, in Mbps.

If you want this vHBA to have an unlimited data rate, select OFF.

Otherwise, click the second radio button and enter an integer between

1 and 10,000.

Note

This option cannot be used in NIV

mode.

PCIe Device Order field

The order in which this vHBA will be used.

To let the system set the order, select ANY. To specify an order, select

the second radio button and enter an integer between 0 and 17.

EDTOV field

The error detect timeout value (EDTOV), which is the number of

milliseconds to wait before the system assumes that an error has

occurred.

Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4

8

OL-23489-08