Cisco Systems UCSCPCIECSC02 manual Enable TCP Rx Offload, Enable TCP Receive Side Scaling

Page 29

Managing Network Adapters

Modifying vNIC Properties

Name

Description

Enable TCP Segmentation If checked, the CPU sends large TCP packets to the hardware to be

Offload check boxsegmented. This option may reduce CPU overhead and increase throughput rate.

 

If cleared, the CPU segments large packets.

 

Note

This option is also known as Large Send Offload

 

 

(LSO).

Enable TCP Rx Offload

If checked, the CPU sends all packet checksums to the hardware for

Checksum Validation check box

validation. This option may reduce CPU overhead.

 

If cleared, the CPU validates all packet checksums.

Enable TCP Tx Offload

If checked, the CPU sends all packets to the hardware so that the

Checksum Generation check box

checksum can be calculated. This option may reduce CPU overhead.

 

If cleared, the CPU calculates all packet checksums.

Enable Large Receive check box

If checked, the hardware reassembles all segmented packets before

 

sending them to the CPU. This option may reduce CPU utilization and

 

increase inbound throughput.

 

If cleared, the CPU processes all large packets.

Step 14 In the Receive Side Scaling area, update the following fields:

Name

Description

Enable TCP Receive Side Scaling

Receive Side Scaling (RSS) distributes network receive processing

check box

across multiple CPUs in multiprocessor systems.

 

If checked, network receive processing is shared across processors

 

whenever possible.

 

If cleared, network receive processing is always handled by a single

 

processor even if additional processors are available.

Enable IPv4 RSS check box

If checked, RSS is enabled on IPv4 networks.

Enable TCP-IPv4 RSS check box

If checked, RSS is enabled for TCP transmissions across IPv4 networks.

Enable IPv6 RSS check box

If checked, RSS is enabled on IPv6 networks.

Enable TCP-IPv6 RSS check box

If checked, RSS is enabled for TCP transmissions across IPv6 networks.

Enable IPv6 Extension RSS

If checked, RSS is enabled for IPv6 extensions.

check box

 

 

Enable TCP-IPv6 Extension RSS

If checked, RSS is enabled for TCP transmissions across IPv6 networks.

check box

 

 

Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4

OL-23489-08

29

Image 29
Contents Overview of the Cisco UCS C-Series Network Adapters Managing Network AdaptersCisco UCS P81E Virtual Interface Card Viewing Network Adapter PropertiesPCI Slot column Cimc Management EnabledProduct Name column Serial Number columnFIP Mode field Configuration Pending fieldNIV Mode field FaultConfiguring Adapter Properties Click Save Changes Enable FIP Mode check boxEnable NIV Mode check box Number of VM FEX Interfaces Guidelines for Managing vHBAs Managing vHBAsViewing vHBA Properties Name fieldEnable Persistent LUN Binding FC SAN Boot check boxDefault Vlan field Class of Service drop-down listLink Down Timeout field Enable FCP Error RecoveryPort Down Timeout field Ratov fieldFlogi Timeout field Interrupt Mode drop-down listThrottle Count field LUNs per Target fieldModifying vHBA Properties World Wide Node Name field Error Recovery area, update the following fields Fibre Channel Interrupt area, update the following fields Name Click Add vHBA Creating a vHBACreating a Boot Table Entry VHBA Boot TableDeleting a vHBA Fc1VHBA Persistent Binding Deleting a Boot Table EntryViewing Persistent Bindings Guidelines for Managing vNICs Managing vNICsRebuilding Persistent Bindings PCI Order field Viewing vNIC PropertiesTrust Host CoS check box Failback Timeout field Enable PXE Boot check boxEnable Uplink Failover check box Coalescing Time field Interrupt Count fieldCoalescing Type drop-down list Receive Queue Count fieldEnable TCP Tx Offload Enable TCP Rx OffloadEnable Large Receive check box Transmit Queue Ring Size fieldModifying vNIC Properties Enable TCP-IPv6 Extension RSSAccess Ethernet Interrupt area, update the following fields Ethernet Transmit Queue area, update the following fields Enable TCP Receive Side Scaling Click Add vNIC Creating a vNICDeleting a vNIC Managing VM FEXVirtual Machine Fabric Extender Viewing Virtual FEX PropertiesPXE Boot field Vlan Mode columnProperties button Uplink Failover columnCoalescing Type field Interrupt Mode fieldEnable Large Receive field Enable TCP SegmentationEnable IPv4 RSS field Enable TCP-IPv4 RSS fieldExporting the Adapter Configuration Backing Up and Restoring the Adapter ConfigurationClick Export Configuration Tftp Server IP Address fieldClick Import Configuration Importing the Adapter ConfigurationRestoring Adapter Defaults Adapter Firmware Installing Adapter Firmware From a Local FileManaging Adapter Firmware Install Firmware button Installing Adapter Firmware From a Tftp ServerActivating Adapter Firmware Resetting the AdapterOL-23489-08
Related manuals
Manual 204 pages 40.67 Kb