Cisco Systems UCSCPCIECSC02 manual Viewing Persistent Bindings

Page 19

Managing Network Adapters

Viewing Persistent Bindings

Viewing Persistent Bindings

Procedure

Step 1 In the Navigation pane, click the Server tab.

Step 2 On the Server tab, click Inventory.

Step 3 In the Inventory pane, click the Network Adapters tab.

Step 4 In the Adapter Cards area, select the adapter card.

If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the Adapter Cards area.

Step 5 In the tabbed menu below the Adapter Cards area, click the vHBAs tab.

Step 6 In the Host Fibre Channel Interfaces area, select a vHBA from the table.

Step 7 Click Persistent Bindings to open the Persistent Bindings dialog box for the selected vHBA. Step 8 In the Persistent Bindings dialog box for the selected vHBA, review the following information:

	Name	Description
	Index column	The unique identifier for the binding.
	Target WWPN column	The target World Wide Port Name with which the binding is associated.
	Host WWPN column	The host World Wide Port Name with which the binding is associated.
	Bus ID column	The bus ID with which the binding is associated.
	Target ID column	The target ID on the host system with which the binding is associated.
	Rebuild Persistent Bindings	Clears all unused bindings and resets the ones that are in use.
	button
	Close button	Closes the dialog box and saves your changes.
Step 9 Click Close.

Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4

OL-23489-08

19

Image 19

Contents

Overview of the Cisco UCS C-Series Network Adapters Managing Network AdaptersCisco UCS P81E Virtual Interface Card Viewing Network Adapter PropertiesSerial Number column Cimc Management EnabledPCI Slot column Product Name columnFault Configuration Pending fieldFIP Mode field NIV Mode fieldConfiguring Adapter Properties Enable NIV Mode check box Number of VM FEX Interfaces Enable FIP Mode check boxClick Save Changes Name field Managing vHBAsGuidelines for Managing vHBAs Viewing vHBA PropertiesClass of Service drop-down list FC SAN Boot check boxEnable Persistent LUN Binding Default Vlan fieldRatov field Enable FCP Error RecoveryLink Down Timeout field Port Down Timeout fieldLUNs per Target field Interrupt Mode drop-down listFlogi Timeout field Throttle Count fieldModifying vHBA Properties World Wide Node Name field Error Recovery area, update the following fields Fibre Channel Interrupt area, update the following fields Name Click Add vHBA Creating a vHBAFc1 VHBA Boot TableCreating a Boot Table Entry Deleting a vHBAVHBA Persistent Binding Deleting a Boot Table EntryViewing Persistent Bindings Rebuilding Persistent Bindings Managing vNICsGuidelines for Managing vNICs Trust Host CoS check box Viewing vNIC PropertiesPCI Order field Enable Uplink Failover check box Enable PXE Boot check boxFailback Timeout field Receive Queue Count field Interrupt Count fieldCoalescing Time field Coalescing Type drop-down listTransmit Queue Ring Size field Enable TCP Rx OffloadEnable TCP Tx Offload Enable Large Receive check boxModifying vNIC Properties Enable TCP-IPv6 Extension RSSAccess Ethernet Interrupt area, update the following fields Ethernet Transmit Queue area, update the following fields Enable TCP Receive Side Scaling Click Add vNIC Creating a vNICViewing Virtual FEX Properties Managing VM FEXDeleting a vNIC Virtual Machine Fabric ExtenderUplink Failover column Vlan Mode columnPXE Boot field Properties buttonCoalescing Type field Interrupt Mode fieldEnable TCP-IPv4 RSS field Enable TCP SegmentationEnable Large Receive field Enable IPv4 RSS fieldTftp Server IP Address field Backing Up and Restoring the Adapter ConfigurationExporting the Adapter Configuration Click Export ConfigurationRestoring Adapter Defaults Importing the Adapter ConfigurationClick Import Configuration Managing Adapter Firmware Installing Adapter Firmware From a Local FileAdapter Firmware Install Firmware button Installing Adapter Firmware From a Tftp ServerActivating Adapter Firmware Resetting the AdapterOL-23489-08

Related manuals

Manual 204 pages 40.67 Kb