Lathem 800P manual Appendix a Changing the Print Intensity

Page 28

800P TruAlign Time Recorder User Guide

Appendix A - Changing the Print Intensity

How to change the print intensity on the timecard

If the imprint on the timecard is getting faint you may wish to increase the print intensity setting from the factory setting of 5. See the instructions below.

￿ Enter the ‘Setup Mode’. See Page 13.

￿ Press the SET button until you get to Function 13

￿ Use the + button to scroll through and set the desired print intensity level.

￿ Press the SET button through Function 14 and 15.

￿ The time recorder will go to the normal time/date display with the changes to the print intensity applied.

Example: Set the print intensity from 5 to 7

Function #

Print Intensity

13:5

13:7

Step 1

Press the ￿ or - button until the display shows ‘7’.

Step 2

Press the SET button when the setting is correct. The setting will be accepted, continue pressing the SET button through Function 14 and 15.

The time recorder will go to the normal time/date display with the changes to the print intensity applied.

Note: If you scroll past the setting you wish, continue pressing the ￿ or - button until the desired setting displays, then press the SET button.

Page 29

Image 28
Contents TruAlign Time Recorder Disclaimer Table of Contents Features IntroductionOptional Accessories About this ManualPacking Contents Recommended Installation ToolsQuick Easy Setup Wall Mount StepQuick Easy Setup Table Top Mount Time=U.S. Eastern Time Daylight Savings=OnSetup Remove the Back-PlateProgramming the 800P AM 1 1 0 PM0 1 0 Page Function Settings Selections Factory Settings Press the or button until the display shows ‘10’ Step Press the or button until the display shows ‘09’ Page Press the or button until the display shows ‘24’ 10 1 10 2 Press the or button until the display shows ‘2’ 12 E 12 F Page 14 n 14 y Page Wall Mount Wall Using the Time Recorder Front ViewHow to change the print intensity on the timecard Appendix a Changing the Print IntensityHow to calibrate the TruAlign function Appendix B Calibrating the TruAlign FunctionCAL 800P TruAlign Time Recorder User Guide Appendix C Testing the Print Head Appendix D Changing the dates for Daylight Savings Appendix E Disable Daylight Savings Correction Frequently Asked Questions Specifications Minutes to 1/100s of Hour Warranty Specifications