Lathem 800P manual Wall

Page 26

800P TruAlign Time Recorder User Guide

Wall

Step 3

Using the supplied 6/32 x 3/8 Philips head screws install the back-plate to the wall-mount bracket.

Wall

Step 4

With the back-plate secured to the wall-mount bracket, plug the AC wall adapter into the time recorder. Align and place the time recorder on the back-plate and secure the two together with the 8- 32 x ¼ Philips head screw, being careful not to pinch the AC cord. Plug the wall adapter into the AC outlet.

Note: Make sure the bottom of the timecard shelf is over the edge of the back-plate before securing the screw.

Page 27

Image 26

Contents TruAlign Time Recorder Disclaimer Table of Contents Features IntroductionOptional Accessories About this ManualPacking Contents Recommended Installation ToolsQuick Easy Setup Wall Mount StepQuick Easy Setup Table Top Mount Time=U.S. Eastern Time Daylight Savings=OnSetup Remove the Back-PlateProgramming the 800P AM 1 1 0 PM0 1 0 Page Function Settings Selections Factory Settings Press the or button until the display shows ‘10’ Step Press the or button until the display shows ‘09’ Page Press the or button until the display shows ‘24’ 10 1 10 2 Press the or button until the display shows ‘2’ 12 E 12 F Page 14 n 14 y Page Wall Mount Wall Using the Time Recorder Front ViewHow to change the print intensity on the timecard Appendix a Changing the Print IntensityHow to calibrate the TruAlign function Appendix B Calibrating the TruAlign FunctionCAL 800P TruAlign Time Recorder User Guide Appendix C Testing the Print Head Appendix D Changing the dates for Daylight Savings Appendix E Disable Daylight Savings Correction Frequently Asked Questions Specifications Minutes to 1/100s of Hour Warranty Specifications