Lathem 800P manual Appendix E Disable Daylight Savings Correction

Page 34

800P TruAlign Time Recorder User Guide

Appendix E - Disable Daylight Savings Correction

By default, daylight saving time is factory set for the second Sunday in March and the first Sunday in November.

If you are located in an area that does not recognize daylight saving time, you can disable the automatic correction. To disable the daylight savings correction, see the instructions below.

Enter the ‘Setup Mode’. See Page 13.

Press the SET button until you get to Function 4.

Press the + or - button until the display shows ‘Y’. Then press the SET button to go to Function 5.

Press the + or - button until the display shows ‘00’. Then press the SET button to go to Function 9.

Press the SET button through Function 9, 10, 11, 12, 13, 14 and 15.

The time recorder will go to the normal time/date display with the daylight savings correction disabled.

Page 35

Image 34

Contents TruAlign Time Recorder Disclaimer Table of Contents Features IntroductionOptional Accessories About this ManualPacking Contents Recommended Installation ToolsQuick Easy Setup Wall Mount StepQuick Easy Setup Table Top Mount Time=U.S. Eastern Time Daylight Savings=OnSetup Remove the Back-PlateProgramming the 800P AM 1 1 0 PM0 1 0 Page Function Settings Selections Factory Settings Press the or button until the display shows ‘10’ Step Press the or button until the display shows ‘09’ Page Press the or button until the display shows ‘24’ 10 1 10 2 Press the or button until the display shows ‘2’ 12 E 12 F Page 14 n 14 y Page Wall Mount Wall Using the Time Recorder Front ViewHow to change the print intensity on the timecard Appendix a Changing the Print IntensityHow to calibrate the TruAlign function Appendix B Calibrating the TruAlign FunctionCAL 800P TruAlign Time Recorder User Guide Appendix C Testing the Print Head Appendix D Changing the dates for Daylight Savings Appendix E Disable Daylight Savings Correction Frequently Asked Questions Specifications Minutes to 1/100s of Hour Warranty Specifications