Wall Mount

800P TruAlign Time Recorder User Guide

Select a site to install the 800P time recorder that will be convenient to employees clocking In and Out. The 800P time recorder can be mounted directly to a wall. When deciding where the time recorder will be installed, keep in mind that 115VAC power outlet should be within 6 feet of the mounting location.

Mounting to a Wall

Note: If you are installing the time recorder on a wall with drywall, it is recommended to use a “Molly Bolt” or Toggle Bolt” type of wall anchor.

Run wall adapter cord from underneath through the center hole in wall-mount bracket.

Step 1

Using the wall-mount bracket as a guide, mark the location on the wall of where the screws will be installed. Run the AC wall adapter cord through hole in the wall-mount bracket and

48 inches then install the wall-mount bracket to the wall using the supplied wall- mount screws. Note: The time recorder should be mounted for best visibility, about 48 inches from the floor.

Step 2

Remove the Philips head screw holding the back-plate on the time recorder. Be sure to retain the Philips head screw for later.

Page 26