Lathem 800P manual Step

Function 2 – Set Date

800P TruAlign Time Recorder User Guide

When prompted to set the date, use the + button to scroll forward or the - button to scroll backwards. With the desired date showing on the display, press the SET button. The ‘Set Year’ function (3) will display next.

Note: If setting the date in February make sure you set the date correctly, for example leap year has 29 days, otherwise the daylight savings may not activate correctly.

Example: Set the date from 21 to 05

Function # Date

2 : 2 1

2 : 0 5

Step 1

Press the ￿ or - button until the display shows ‘05’.

Step 2

Press the SET button when the date is correct. The date will be accepted, go to the ‘Set Year’ function.

Note: If you scroll past the date you wish, continue pressing the ￿ or - button until the desired date displays, then press the SET button.

Page 16