Lathem manual 800P TruAlign Time Recorder User Guide

	800P TruAlign Time Recorder User Guide
	With the display showing ‘CAL 2’, insert and
C A L 2	intentionally misalign the timecard, see
	Figure 2.
	With the timecard fully inserted and
	misaligned, press and hold the					-	button to
	register the alignment.
	Note the value showing on the display. Shift
	the card slightly left and right, the value will
	increase or decrease.
E n d	When the display is at the highest value,
	release the		-		button, the display will show
	‘END’.
	Remove the timecard. Subtract the smaller
	registration value from the larger; the
	difference should be greater than 50. If the
	value is less than 50 you should repeat the
	TruAlign calibration.
	Press the	SET		button to complete the
	calibration.	The time recorder will go to the
	normal time/date display with the changes
	to the TruAlign calibration applied.

CAL 2

Misalignment of timecard.

Figure 2

Page 32