Appendix D Changing the dates for Daylight Savings

800P TruAlign Time Recorder User Guide

Appendix D - Changing the dates for Daylight Savings

By default, daylight saving time is factory set for the second

Sunday in March and the first Sunday in November.

To change the factory set daylight savings dates, see the

instructions below.

Enter the ‘Setup Mode’. See Page 13.

Press the

button until you get to Function 4.

SET

button until the display shows ‘Y’. Then press

Press the

the SET

button

to go

to Function 5.

Use the

button to scroll through and set the

desired

month

for

the spring daylight savings. Then press

the

button to go to Function 6.

SET

Press the

button to scroll through and set the

desired

Sunday

for

the spring daylight savings. Then press

the

button to go to Function 7.

SET

Setting Values

4 = Fourth Sunday

= First Sunday

= Second Sunday

L = Last Sunday

= Third Sunday

Use the

button to scroll through and set the

desired

month

for

the fall daylight savings. Then press the

button to

go to Function 8.

SET

Press the

button to scroll through and set the

desired

Sunday for the fall daylight savings, and then press

the

button.

SET

Setting Values

4 = Fourth Sunday

= First Sunday

= Second Sunday

L = Last Sunday

= Third Sunday

Press the

button through Function. 9, 10, 11, 12, 13, 14

SET

and 15.

The time recorder will go to the normal time/date display

with the changes for daylight savings applied.

Page 34