800P TruAlign Time Recorder User Guide
Function 14 – Confirmation Beep Disable/Enable
When prompted to select whether the confirmation beep will sound or will be disabled, use the + button to scroll forward or the - button to scroll backwards. With the desired setting showing on the display, press the SET button. The ‘TruAlign Calibration’ function (15) will display next.
If enabled, a confirmation beep will sound after each imprint on a timecard and also when you press the time recorder programming buttons.
Setting Values
n = Confirmation beep disabled, this is the factory setting
y = Confirmation beep is enabled Example: Set the confirmation beep to enabled (y)
Function # | Enable/Disable |
| Beep |
14:n
14:y
Step 1
Press the or - button until the display shows ‘y’.
Step 2
Press the SET button when the setting is correct. The setting will be accepted, go to the ‘TruAlign Calibration’ function.
Note: If you scroll past the setting you wish, continue pressing the or - button until the desired setting displays, then press the SET button.
Page 24