Lathem manual Programming the 800P

Page 10

800P TruAlign Time Recorder User Guide

Programming the 800P

After removing the back-plate and connecting the AC power you will be ready to begin programming the 800P time recorder. Use the three buttons on the back to program the time recorder. Hold the time recorder with both hands with the display facing you. Use your index and middle fingers to press the programming buttons on the back of the time recorder while watching the settings on the display. Note: An undisturbed environment is recommended when programming the timeclock.

Using the 3 programming buttons

+ (Plus)

When you press the + button, you increment or change the selected setting.

SET

You can set the value of the selected setting on the display by pressing the SET button which also moves you to the next available setting.

-(Minus)

When you use the - button, you decrement or change the selected setting.

What if I press the SET button by mistake?

If you make a programming mistake by pressing the SET button too soon, simply unplug the AC power or continue pressing the SET button until you have the normal time and date on the display. Then go back into the Set Up Mode and continue your programming.

Page 11

Page 9 Page 11
Image 10
Page 9 Page 11
Contents TruAlign Time Recorder Disclaimer Table of Contents Features IntroductionOptional Accessories About this ManualPacking Contents Recommended Installation ToolsQuick Easy Setup Wall Mount StepQuick Easy Setup Table Top Mount Time=U.S. Eastern Time Daylight Savings=OnSetup Remove the Back-PlateProgramming the 800P AM 1 1 0 PM0 1 0 Page Function Settings Selections Factory Settings Press the or button until the display shows ‘10’ Step Press the or button until the display shows ‘09’ Page Press the or button until the display shows ‘24’ 10 1 10 2 Press the or button until the display shows ‘2’ 12 E 12 F Page 14 n 14 y Page Wall Mount Wall Using the Time Recorder Front ViewHow to change the print intensity on the timecard Appendix a Changing the Print IntensityHow to calibrate the TruAlign function Appendix B Calibrating the TruAlign FunctionCAL 800P TruAlign Time Recorder User Guide Appendix C Testing the Print Head Appendix D Changing the dates for Daylight Savings Appendix E Disable Daylight Savings Correction Frequently Asked Questions Specifications Minutes to 1/100s of Hour Warranty Specifications
Top Page Image Contents