800P TruAlign Time Recorder User Guide
Setting the Time
To enter the ‘Time Set Up Mode’, press the + and SET buttons at the same time.
The blue light will turn off and the display will show the hours and minutes, release the + and SET buttons.
Press the + button to move the time forward or press the - button to move the time backwards. To move quickly through the time, press and hold down the + or - button. Holding down either button will increase how quickly you scroll through the time. When you have the desired hours and minutes on the display, press the SET button.
Note: The seconds will be zeroed when you press the SET button, so it’s recommended to set the time 1 or 2 minutes ahead of the actual time. Wait until the actual time matches the time recorder, and then press the SET button which will synchronize the time recorder time with the actual time.
Example: Set the time from 11:00am to 1:00pm
Hours and Minutes
AM 1 1 0 0
PM0 1 0 0
Step 1
Press the button to scroll forward until the display shows ‘PM 0 1 0 0’. Notice while you are scrolling through the hours the AM will change to PM.
Step 2
Press the SET button when the AM/PM indicator, hour and minutes are correct. The time will be accepted and the time recorder will return to a normal display.
Page 12