4. Configuring the Machine Using Utilities
Configuring the Network Settings
Click [Network Settings] to display the page for configuring the network settings.
This page contains the following tabs: [Network Status], [IPv6 Configuration], [Network Application], [DNS], [Auto
•Depending on the settings you change, the machine might need to be restarted.
•Depending on the model you are using, some items might not appear.
Network Status Tab
General Status
Item | Description |
|
|
Ethernet Speed | Shows the type and speed of the network connection. |
|
|
IPP Printer Name | Shows the name used to identify the machine on the network. |
|
|
Network Version | Shows the version of the machine's network module (a part of the machine |
| firmware). |
|
|
Ethernet MAC Address | Shows the Ethernet MAC address of the machine. |
|
|
Active Interface | Shows the active communication method. |
|
|
TCP/IP Status |
|
Item | Description |
|
|
DHCP | Select whether the machine should receive a dynamic IPv4 address |
| automatically using DHCP. To use DHCP, select [Active]. When enabled, |
| the items below cannot be configured. |
|
|
IP Address | Enter the IPv4 address for the machine. |
|
|
Subnet Mask | Enter the subnet mask of the network. |
|
|
Gateway | Enter the IPv4 address of the network gateway. |
|
|
44