Ricoh SP 213w Communication Mode Select the mode to connect, Wireless LAN directly, select Ad-Hoc

Configuring the Network Settings

Item	Description
Communication Mode	Select the mode to connect in.
	If the machine will be connected to a wireless router or access point, select
	[Infrastructure]. If the machine will be connected to a device equipped with
	a wireless LAN directly, select [Ad-Hoc].
Ad-Hoc Channel	If [Ad-Hoc] is selected for [Communication Mode], select a channel.
Authentication	Select an authentication method.
	If [Ad-Hoc] is selected for [Communication Mode], you can select only
	[Open System] and [Shared Key].
Encryption	Select an encryption method.
	If [Ad-Hoc] is selected for [Communication Mode], you can select only
	[None] and [WEP].
WPA Passphrase	If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for
	[Authentication], enter the WPA encryption key.
WEP Key Length	If [WEP] is selected for [Encryption], select 64 bits or 128 bits for the length
	of the encryption key.
WEP Transmit Key ID	Select an ID number to identify each WEP key in case multiple WEP
	connections are configured.
WEP Key Format	Select a format for entering the WEP key.
WEP Key	Enter the WEP key. The number and type of characters you can enter vary
	depending on the length and format selected for the key. See the following:
	• WEP key length: [64bit], Format: [Hexadecimal]
	WEP key max length: 10 characters (0-9, A-F, a-f)
	• WEP key length: [64bit], Format: [ASCII]
	WEP key max length: 5 characters (0x20-0x7e)
	• WEP key length: [128bit], Format: [Hexadecimal]
	WEP key max length: 26 characters (0-9, A-F, a-f)
	• WEP key length: [128bit], Format: [ASCII]
	WEP key max length: 13 characters (0x20-0x7e)

•If you are configuring the connection settings manually, check the SSID, authentication method, or encryption key of the access point or wireless router in advance.

51