Ricoh SP 211, SP 213Nw, SP 213w appendix Smtp Tab, POP3 Tab

	Configuring the Network Settings
SMTP Tab
SMTP
Item	Description
Primary SMTP Server	Enter the IP address or host name of the SMTP server. Can contain up to 64
	characters.
Port No.	Enter the port number for SMTP (1 to 65535).
Authentication Method	Select an authentication method from the following:
	[Anonymous]: The user name and password are not necessary.
	[SMTP]: The machine supports NTLM and LOGIN authentication.
	[POP before SMTP]: The POP3 server is used for authentication. When
	sending e-mails to an SMTP server, you can enhance the SMTP server
	security level by connecting to the POP server for authentication.
User Name	Enter the user name for logging in to the SMTP server. Can contain up to 32
	characters.
Password	Enter the password for logging in to the SMTP server. Can contain up to 32
	characters.
Device E-mail Address	Enter the machine’s e-mail address.
	This address is used as the sender's address of e-mail messages sent from
	this machine, such as notification e-mails. Can contain up to 64 characters.
Server Timeout	Enter the number of seconds the machine waits before considering an
(seconds)	SMTP operation to have timed out (1 to 999).
POP3 Tab
POP3 Settings
Item	Description
POP3 Server	Enter the IP address or host name of the POP3 server for e-mail reception.
	The POP3 server specified here will be used for [POP before SMTP]. Can
	contain up to 64 characters.
User Account	Enter the user name for logging in to the POP3 server. Can contain up to 32
	characters.

49