Samsung Guide to CLP-325W and CLP-320 Factory Reset and SyncThru™ Web Service Setup
Page 36

example, 00:15:99:29:51:A8 becomes 0015992951A8.

•IP Address: Enter a new IP address for your printer.

For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X. (X is number between 1 and 254 other than the computer’s address.)

•Subnet Mask: Enter a Subnet Mask.

•Default Gateway: Enter a Default Gateway.

6.Select Apply, then OK, and OK again. The printer will automatically print the configuration report. Confirm that all the settings are correct. Quit Safari. You may close and eject the installation CD-ROM. If necessary, restart the computer’s firewall. You have successfully changed the IP address, subnet mask, and gateway.

IPv4 setting using SetIP Program (Linux)

SetIP program should be automatically installed during the printer driver installation.

The path and UIs may differ by Linux OS version. Refer to the Linux OS manual to turn firewall off.

1.Print the machine’s network configuration report to find your machine’s MAC address.

2.Open the /opt/Samsung/mfp/share/utils/.

3.Double click the SetIPApplet.html file.

4.Click to open the TCP/IP configuration window.

5.Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply.

When you enter the MAC address, enter it without a colon(:).

6.The machine prints the network configuration report. Confirm all the settings are correct.

7.Close the SetIP program.

IPv6 configuration

TCP/IPv6 is supported properly only in Windows Vista or higher.

If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again (See "Restoring factory default settings using SyncThru™ Web Service" on page 36).

To use the IPv6 network environment, follow the next procedure to use the IPv6 address.

The machine is provided with IPv6 feature on.

1.Connect your machine to the network with a network cable.

2.Turn on the machine.

3.Print a Network Configuration Report from the machine’s control panel that will check IPv6 addresses.

4.Select Start > Control Panel > Hardware and Sound > Printers > Add Printer.

5.Click Add a local printer on the Add Printer windows.

6.Follow the instruction on the window.

If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by.

Printing network configuration report

You can print a Network Configuration Report from the machine's control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshooting problems.

To print the report:

In ready mode, press and hold the (cancel button) for about 5 seconds. You can find your machine’s MAC address and IP address. For example:

•MAC Address: 00:15:99:41:A2:78

•IP Address: 192.0.0.192

Setting IPv6 addresses

Machine supports following IPv6 addresses for network printing and managements.

•Link-local Address: Self-configured local IPv6 address. (Address starts with FE80.)

•Stateless Address: Automatically configured IPv6 address by a network router.

•Stateful Address: IPv6 address configured by a DHCPv6 server.

•Manual Address: Manually configured IPv6 address by a user.

Manual address configuration

1.Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL (See "SyncThru™ Web Service" on page 34).

For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.

2.When the SyncThru™ Web Service window opens, click Network Settings.

3.Click TCP/IPv6.

4.Enable the Manual Address In the TCP/IPv6 section.

5.Select the Address/Prefix and click the Add button, then the router prefix will automatically be entered into the address field.

Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F.)

6.Click the Apply button.

Installing printer driver

Driver installation for network printer in IPv6 network environment is same as TCP/IPv4 (See "Installing network connected machine’s driver" on page 37).

Select TCP/IP Port and when the list of machines are displayed, simply select your machine's IPv6 address.

Using SyncThru™ Web Service

1.Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL.

2.Select one of the IPv6 addresses (Link-local Address, Stateless Address, Stateful Address, Manual Address) from Network Configuration Report.

3.Enter the IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701]) Address must be enclosed in '[]' brackets.

Restoring factory default settings using SyncThru™ Web Service

1.Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window.

For example,

2.Click Go to access the SyncThru™ Web Service.

3.Click Login on the upper right of the SyncThru™ Web Service website.

Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Color Laser Printer Copyright CopyrightContents Setting a wireless network with the WPS button Setting a wireless network from the computerAltitude adjustment Setting the default tray and paper Printer driver featuresUsing the Smart Panel program Using the Unified Linux Driver ConfiguratorPrinting a machine report Cleaning a machine Solving other problemsCommon Windows problems Common Linux problemsCommon Macintosh problems How to purchaseSafety information Important safety symbolsSafety information Operating environmentOperating method Installation / Moving Maintenance / CheckingSupply usage Laser Safety Statement Ozone SafetyRegulatory information Regulatory informationPower Saver RecyclingRadio Frequency Emissions FCC Information to the UserFCC Statement for Wireless LAN use United states of americaTurkey only Russia only Canadian Radio Interference RegulationsGermany only Replacing the Fitted Plug for UK Only Declaration of Conformity European CountriesImportant warning Approvals and CertificationsWireless Guidance Regulatory Compliance StatementsOpenSSL License Original SSLeay LicenseChina only Regulatory information About this user’s guide ConventionAbout this user’s guide Convention Description ExampleFinding more information Material name DescriptionSamsung website Features of your new product Special FeaturesFeatures of your new product Features by models CLP-320KCLP-321 CLP-320NK CLP-325WK CLP-325K CLP-321N CLP-326W Introduction Machine overviewFront view IntroductionRear view Rear cover release button USB port Network portaControl panel overview Wireless LED Understanding the control panelIntroducing the useful buttons Status/ Toner LEDsCancel button Power buttonDemo print button WPS buttonSetting up the hardware Getting startedPrinting a demo Supplied softwareSystem requirements Microsoft WindowsMacintosh Installing USB connected machine’s driver LinuxWindows Open the Applications folder Utilities Print Setup Utility Search againDirect Input HelpInstalling the Unified Linux Driver Installing the Smart PanelInstalling the Printer Settings Utility Setting up a host computer Setting up a client computerSharing your machine locally Using a wired network Network environmentIntroducing useful network programs Printing network configuration report Setting IP addressIPv4 configuration IPv4 setting using SetIP Program WindowsIPv6 configuration Installing network connected machine’s driver Select Socket/HP Jet Direct in Printer Type Add network Printer Wireless network setup clp-325wk/clp-326w only Choosing the wireless network installation typeSetting a wireless network with the WPS button Getting startedSetting a wireless network from the computer Setting a wireless network with the WPS buttonSetting a wireless network with USB cable Select the Wireless Setting and Installation option Case of WPAInstalling the machine on an Ad-Hoc wireless network Windows Wireless Network Setting Complete window appearsFor the Dhcp method For the Static methodClick on Wireless Setting and Installation TKIP, AES, Tkip AESSetting a wireless network with network cable Setting IP addressPrinting a network configuration report Signal is Printer Self Network. Then, click on NextConfiguring the machine’s wireless network Open System Preferences Click on SecurityCompleting the installation Turning the Wi-Fi network on/offTroubleshooting Solving other problems PC Connection ErrorBasic setup Altitude adjustmentSetting the default tray and paper From your computerUsing the power saving feature Setting the humidity modeSelect Printer and click Properties… Click Advanced tab Click EmulationMedia sizes supported in each mode Media and traySelecting print media Guidelines for selecting the print mediaChanging the tray size Paper extend leverPaper cover Paper length guideLoading paper in the tray TrayTips on using the manual feeding method Manual feeding in the trayPrinting on special media Types Tray Manual feedingEnvelopes TransparenciesLabels Acceptable UnacceptableSetting the paper size and type Using the output supportPrinter driver features PrintingIntroducing useful software program Basic printingCanceling a print job Using a favorite settingOpening printing preferences Click Properties or PreferencesUsing help Using special print featuresPrinting multiple pages on one sheet of paper Printing postersUsing watermarks Printing on both sides of the paper ManualChange percentage of your document Fitting your document to a selected paper sizeUsing overlay Graphics tab optionsChanging the default print settings Setting your machine as a default machineAdjusting color Adjusting the sharpness and smoothnessChanging printer settings Printing to a file PRNMacintosh printing Printing a documentPrinter Features Printer SettingsLinux printing Printing from applicationsConfiguring printer properties Open the Unified Driver ConfiguratorPrinting files Printer Properties window opensUsing SyncThru Web Service To access SyncThru Web ServiceSyncThru Web Service overview Management toolsUsing the Smart Panel program Mail notification setupSetting the system administrator information Understanding Smart PanelUsing the Unified Linux Driver Configurator Changing the Smart Panel Program SettingsOpening the Unified Driver Configurator Printers configuration windowPorts configuration Switches to Ports configurationClasses tab Maintenance Cleaning a machineCleaning the outside Cleaning the insideStoring the toner cartridge Toner cartridge storageTips for moving & storing your machine Handling instructionsUse of non-Samsung and refilled toner cartridge Estimated cartridge lifeTroubleshooting TroubleshootingRedistributing toner Tips for avoiding paper jamsClearing paper jams Inside the machinePaper exit area Troubleshooting Solving other problems System problemsPower problems Condition Suggested solutionsPaper feeding problems Printing problems Condition Possible cause Suggested solutionsPrinting quality problems Dropouts White SpotsVertical lines Color or BlackCondition Common Windows problems Common Linux problemsCommon Macintosh problems How to purchase Maintenance partsSupplies Available suppliesReplacing the imaging unit Supplies Replacing the waste toner container Specifications Hardware specificationsEnvironmental specifications Electrical specificationsPower ratinga Power consumptionCLP-320K/CLP-321/CLP-325K/ CLP-326 Less than 5 W CLP-320NK/CLP-321N Less than 6 WPrint media specifications Type Size Dimensions Weighta CapacitybSpecifications Contact samsung worldwide Contact Samsung worldwideCountry/Regio Customer Care Center Web Site Philippines Glossary DMPr Dot Matrix PrinterDuplex Duty CycleITU-T No chart IeeeIntranet IP addressResolution ModemNetWare OriginalsSubnet Mask Toner CartridgeUNC Path WatermarkXPS Index Printing a machine report 72 problem, solve ProblemsRegulatory information Safety Service contact numbers 94 SetIP program 35, 47 Smart Panel
Top Page Image Contents