proper WEP key can access the network.
•Encryption: Select the encryption (None, WEP64, WEP128).
•Network Key: Enter the encryption network key value.
•Confirm Network Key: Confirm the encryption network key value.
•WEP Key Index: If you are using the WEP Encryption, select the appropriate WEP Key Index.
The wireless network security window appears when the
The wireless network security window appears. Select Open System or Shared Key for the authentication and click on Next.
•WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a
8.The window showing the wireless network setting appears. Check the settings and click on Next.
Before entering the IP address for the machine, you must know
the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static.
If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address.
•For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. However, if it shows Static, click on Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP).
•For the Static method
If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. However, if it shows DHCP, click on Change TCP/IP to enter the IP address and other network configuration values for the machine.
For example:
If computer’s network information is as shown below:
Then, the machine’s network information should be as below:
9.When the wireless network setting is completed, disconnect the USB cable between the computer and machine. Click on Next.
If the Change PC Network Setting window appears, follow the steps on the window.
Click on Next if you are finished the computer’s wireless network settings.
If you set the computer’s wireless network on DHCP, it will take
several minutes to receive the IP address.
10.The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the setup procedure.
Select No if you want to return to the beginning screen. Then, click on Next.
11.Click on Next when the Confirm Printer Connection window appears.
12.Select the components to be installed. Click on Next.
After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click on Next.
13.After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click on Print a test page.
Otherwise, just click on Next and go to step 15.
14.If the test page prints out correctly, click on Yes. If not, click on No to reprint it.
15.To register as a user of the machine in order to receive information from Samsung, click on
16.Click on Finish.
Installing the machine on a wireless network with an access point (Macintosh)
Items to prepare
Ensure you have the following items ready:
•Access point
•
•Software CD that was provided with your machine
•The machine installed with a wireless network interface
•USB cable
Creating the infrastructure network in Macintosh
When the items are ready, follow the steps below:
1.Check whether the USB cable is connected to the machine. 2.Turn on your computer, access point, and machine.
3.Insert the supplied software CD into your
7.Enter the password and click on OK.
8.The Samsung Installer window opens. Click on Continue.
9.Read the license agreement and click on Continue.
10.Click on Agree to agree to the license agreement.
11.The Samsung Installer window opens. Click on Continue.
12.Select Easy Install and click on Install. Easy Install is recommended for most users. All compoenets necessary for machine operations will be installed.
If you select Custom Install, you can choose individual operations will be installed.
13.Select the Wireless Setting and Installation option.
14.The software searches the wireless network.
If the search has failed, you may check if the USB cable is connected between the computer and machine properly, and
Wireless network setup