Samsung CLP-320, CLP-325W manual Storing the toner cartridge, Toner cartridge storage

Page 73

area.

•Be careful not to scratch the surface of the imaging unit.

•If you leave the front cover open for more than a few minutes, the imaging unit can be exposed to light. This will cause damage to the imaging unit. Close the front cover should the installation need to be halted for any reason.

6.With a dry lint-free cloth, wipe away any dust and spilled toner from the toner cartridges area and their cavities.

After cleaning, let the machine to dry completely.

•If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric.

•If your machine or its surrounding is contaminated with toner, we recommend you to use a cloth or tissue dampened with water to clean it. If you use a vacuum cleaner, toner blows into the air then might be harmful to you.

7.Holding the groove on the front of the imaging unit, push imaging unit into the machine.

8.Insert the waste toner container into position and then push it to make sure that it is firmly seated in place.

9.Slide the toner cartridge back into the machine.

10.Reinstall all the compartments into the machine and close the front cover.

If the front cover is not completely closed, the machine will not operate.

11.Plug in the power cord and turn the machine on.

Storing the toner cartridge

Toner cartridge storage

Toner cartridges contain components that are sensitive to light, temperature, and humidity. Samsung suggests users follow the recommendations to ensure the optimum performance, highest quality, and longest life from your new Samsung toner cartridge.

Store this cartridge in the same environment as the printer it will be used in; this should be in controlled office temperature and humidity conditions. The toner cartridge should remain in its original, unopened package until installation – If original packaging is not available, cover the top opening of the cartridge with paper and store in a dark cabinet.

Opening the cartridge package prior to use dramatically shortens its useful shelf and operating life. Do not store on the floor. If the toner cartridge is removed from the printer, always store the cartridge according to the following guidelines:

•Inside the protective bag from the original package.

•Store lying flat (not standing on end) with the same side facing up as if was installed in the machine.

•Do not store consumable in any of the following conditions: -Temperature greater than 40°C (104°F).

-Humidity range less than 20% and not greater than 80%.

Maintenance_ 73

Page 72 Page 74
Image 73
Page 72 Page 74
Contents Color Laser Printer Copyright CopyrightContents Setting a wireless network from the computer Setting a wireless network with the WPS buttonAltitude adjustment Setting the default tray and paper Printer driver featuresUsing the Unified Linux Driver Configurator Using the Smart Panel programPrinting a machine report Cleaning a machine Solving other problemsCommon Linux problems Common Windows problemsCommon Macintosh problems How to purchaseImportant safety symbols Safety informationSafety information Operating environmentOperating method Maintenance / Checking Installation / MovingSupply usage Ozone Safety Laser Safety StatementRegulatory information Regulatory informationRecycling Power SaverRadio Frequency Emissions FCC Information to the UserUnited states of america FCC Statement for Wireless LAN useTurkey only Russia only Canadian Radio Interference RegulationsDeclaration of Conformity European Countries Germany only Replacing the Fitted Plug for UK OnlyImportant warning Approvals and CertificationsRegulatory Compliance Statements Wireless GuidanceOriginal SSLeay License OpenSSL LicenseChina only Regulatory information Convention About this user’s guideAbout this user’s guide Convention Description ExampleMaterial name Description Finding more informationSamsung website Special Features Features of your new productFeatures of your new product CLP-320K Features by modelsCLP-321 CLP-320NK CLP-325WK CLP-325K CLP-321N CLP-326W Machine overview IntroductionFront view IntroductionRear cover release button USB port Network porta Rear viewControl panel overview Understanding the control panel Wireless LEDIntroducing the useful buttons Status/ Toner LEDsPower button Cancel buttonDemo print button WPS buttonGetting started Setting up the hardwarePrinting a demo Supplied softwareMicrosoft Windows System requirementsMacintosh Linux Installing USB connected machine’s driverWindows Search again Open the Applications folder Utilities Print Setup UtilityDirect Input HelpInstalling the Smart Panel Installing the Unified Linux DriverInstalling the Printer Settings Utility Setting up a client computer Setting up a host computerSharing your machine locally Network environment Using a wired networkIntroducing useful network programs Setting IP address Printing network configuration reportIPv4 configuration IPv4 setting using SetIP Program WindowsIPv6 configuration Installing network connected machine’s driver Select Socket/HP Jet Direct in Printer Type Add network Printer Choosing the wireless network installation type Wireless network setup clp-325wk/clp-326w onlySetting a wireless network with the WPS button Getting startedSetting a wireless network with the WPS button Setting a wireless network from the computerSetting a wireless network with USB cable Case of WPA Select the Wireless Setting and Installation optionWireless Network Setting Complete window appears Installing the machine on an Ad-Hoc wireless network WindowsFor the Static method For the Dhcp methodTKIP, AES, Tkip AES Click on Wireless Setting and InstallationSetting IP address Setting a wireless network with network cablePrinting a network configuration report Signal is Printer Self Network. Then, click on NextOpen System Preferences Click on Security Configuring the machine’s wireless networkTurning the Wi-Fi network on/off Completing the installationTroubleshooting PC Connection Error Solving other problemsAltitude adjustment Basic setupSetting the default tray and paper From your computerSetting the humidity mode Using the power saving featureSelect Printer and click Properties… Click Advanced tab Click EmulationMedia and tray Media sizes supported in each modeSelecting print media Guidelines for selecting the print mediaPaper extend lever Changing the tray sizePaper cover Paper length guideTray Loading paper in the trayManual feeding in the tray Tips on using the manual feeding methodTypes Tray Manual feeding Printing on special mediaTransparencies EnvelopesLabels Acceptable UnacceptableUsing the output support Setting the paper size and typePrinting Printer driver featuresIntroducing useful software program Basic printingUsing a favorite setting Canceling a print jobOpening printing preferences Click Properties or PreferencesUsing special print features Using helpPrinting multiple pages on one sheet of paper Printing postersPrinting on both sides of the paper Manual Using watermarksChange percentage of your document Fitting your document to a selected paper sizeGraphics tab options Using overlaySetting your machine as a default machine Changing the default print settingsAdjusting color Adjusting the sharpness and smoothnessPrinting to a file PRN Changing printer settingsMacintosh printing Printing a documentPrinter Settings Printer FeaturesLinux printing Printing from applicationsOpen the Unified Driver Configurator Configuring printer propertiesPrinting files Printer Properties window opensTo access SyncThru Web Service Using SyncThru Web ServiceSyncThru Web Service overview Management toolsMail notification setup Using the Smart Panel programSetting the system administrator information Understanding Smart PanelChanging the Smart Panel Program Settings Using the Unified Linux Driver ConfiguratorOpening the Unified Driver Configurator Printers configuration windowSwitches to Ports configuration Ports configurationClasses tab Cleaning a machine MaintenanceCleaning the outside Cleaning the insideToner cartridge storage Storing the toner cartridgeHandling instructions Tips for moving & storing your machineUse of non-Samsung and refilled toner cartridge Estimated cartridge lifeTroubleshooting TroubleshootingRedistributing toner Tips for avoiding paper jamsInside the machine Clearing paper jamsPaper exit area Troubleshooting System problems Solving other problemsPower problems Condition Suggested solutionsPaper feeding problems Condition Possible cause Suggested solutions Printing problemsPrinting quality problems White Spots DropoutsVertical lines Color or BlackCondition Common Linux problems Common Windows problemsCommon Macintosh problems Maintenance parts How to purchaseSupplies Available suppliesReplacing the imaging unit Supplies Replacing the waste toner container Hardware specifications SpecificationsEnvironmental specifications Electrical specificationsPower consumption Power ratingaCLP-320K/CLP-321/CLP-325K/ CLP-326 Less than 5 W CLP-320NK/CLP-321N Less than 6 WType Size Dimensions Weighta Capacityb Print media specificationsSpecifications Contact Samsung worldwide Contact samsung worldwideCountry/Regio Customer Care Center Web Site Philippines Glossary Dot Matrix Printer DMPrDuplex Duty CycleIeee ITU-T No chartIntranet IP addressModem ResolutionNetWare OriginalsToner Cartridge Subnet MaskUNC Path WatermarkXPS Index Problems Printing a machine report 72 problem, solveRegulatory information Safety Service contact numbers 94 SetIP program 35, 47 Smart Panel
Top Page Image Contents