must contact the network administrator to get the static IP address.
For example:
If computer’s network information is as shown below:
Then, the machine’s network information should be as below:
9.When the wireless network setting is completed, disconnect the USB cable between the computer and machine. Click on Next.
10.The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the setup procedure.
Select No if you want to return to the beginning screen. Then, click on Next.
11.Click on Next when the Confirm Printer Connection window appears.
12.Select the components to be installed. Click on Next.
After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click on Next.
13.After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click on Print a test page.
Otherwise, just click on Next and go to step 15.
14.If the test page prints out correctly, click on Yes. If not, click on No to reprint it.
15.To register as a user of the machine in order to receive information from Samsung, click on
16.Click on Finish.
Installing the machine on an Ad-Hoc wireless network (Windows)
If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an
Items to prepare
Ensure you have the following items ready:
•
•Software CD that was provided with your machine
•The machine installed with a wireless network interface
•USB cable
Creating the Ad-Hoc network in Windows
When the items are ready, follow the steps below:
1.Check whether the USB cable is connected to the machine.
2.Turn on your computer and the wireless network machine.
3.Insert the supplied software CD into your
•The software CD should automatically run and an installation window appear.
•If the installation window does not appear, click on Start and then
Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive. Click on OK.
•If you use Windows Vista, Windows 7, or Windows Server 2008 R2 click on Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter that represents your drive and click on OK.
•If the AutoPlay window appears in Windows Vista, Windows 7, or Windows Server 2008 R2, click on Run Setup.exe in Install or run program field, and click on Continue or Yes in the User Account Control window.
4.Select the Wireless Setting and Installation option.
•Install Now: If you have set the wireless network, click on this button to install the machine driver to use the wireless network machine. If you have not set the wireless network, click on Wireless Setting and Installation button to set the wireless network before you click on this button.
•Wireless Setting and Installation: Configure the wireless network settings of your machine with a USB cable then install the machine driver. Only for users who have not set up the wireless connection before.
5.Read the License Agreement, and select I accept the terms of the License Agreement. Then, click on Next.
6.The software searches the wireless network.
If the software has failed to search the network, check if the USB cable is connected properly between the computer and machine, and follow the instruction on the window.
7.After searching the wireless networks, a list of wireless networks your machine has searched appears.
If you want to use the Samsung default
Then, click on Next.
If you want to use other
If you want to change
Setting button.
•Enter the wireless Network Name: Enter the SSID name you want (SSID is
•Operation Mode: Select
•Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).
•Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a
Wireless network setup