4
THE FAX MACHINE
Receiving in TAD Mode (SF3000)
1
Press RCV. Mode repeatedly until ÔTADÕ is displayed.
Resolution | Rcv. | |
Mode | ||
Flash | Redial/ | |
Pause | ||
|
Volume/Scroll
In Standby Mode, TAD appears in the right side of the display.
20-JUN 10:30 TAD
2
When a call comes in, the answering machine answers and stores the callerÕs message if they leave one.
If the machine detects a fax signal, it goes into receive mode.
Notes:
¥If you have set your machine to TAD and your answering machine is switched off, or the answering machine is not connected to your fax machine, the machine will automatically go into receive mode after several rings.
¥If your answering machine has a
¥If the sound level of the call is too low because of a poor phone connection, the fax machine or answering machine may not work properly.
¥When you are using manual reception mode on your machine, and you have an answering machine, you must make sure you switch off the answering machine, or the outgoing message will interrupt your phone conversation.
¥Not all answering machines may work with your fax machine.
¥When your answering machine answers an incoming call, it record a fax tone until it realises it is a fax coming through. Your answering machine may tell you a voice message has been left, when it is actually a fax.
4.10 CHAPTER FOUR : THE FAX MACHINE