To set copy options:
1.Load a document with the print side facing down. If necessary, adjust Contrast button to change the contrast. For details on the contrast, see page 2.8.
2.Press Copy. The display asks you to enter the number of copies (1 to 99).
COPY [01-99] <01>
3.If you need two or more copies, enter the desired number using the dial keypad, then press ❷. You can also press ❷ without setting the number of copies. The display shows the next option; copy rate menu.
REDUCE/ENLARGE 1:AUTO 2:MANUAL
4.If you want to reduce or enlarge the image size, press 2, enter the number of the desired copy rate, then press ❷.
ENTER RATE
[50-200] <100>
If not, press 1.
5.The display asks you to choose how to collate. There are two ways to collate multiple copies; OFF and ON.
[COPY COLLATE] 1:ON 2:OFF
The ‘OFF’ is the stacking method. This will make ‘n’ copies of page one, ‘n’ copies of page two, and so on. These will all be stacked on top of each other. The second method ‘ON’ is the sorting method. This will make 1 copy of page 1, 2, 3, 4, in order, then makes a second copy of 1, 2, 3, 4 until a total of ‘n’ copies has been made.
OFF (Group) | ON (Sort) |
1
1
1
2
2
2
1
2
3
1
2
3
6.Press 1 or 2 to choose the desired collation method. You can also press ❷ without setting the collation (2:OFF is default value).
7.Press Copy to begin the copy operation.
Note: When setting the copy options, pressing the Copy will begin the copy operation immediately without displaying any remaining options.
2.30 Making a copy