Manual Recording, Sync | Mitsubishi Electronics HS-S8300E(BRS)

MANUAL RECORDING

ONE SHOT/INTERVAL RECORDING

One-shot recording or Interval recording is possible when the recording mode is set to 0H.

1Press the REC/PLAY MODE button to set the recording mode to 0H.

2Set the number of fields in “ONE SHOT•FIELD” on the “RECORDING SET UP” menu.

3 For One-shot recording, select “SHOT” in “ONE SHOT•INTERVAL”.

For Interval recording, choose the interval time from 10S(second) to 3M(minute) in “ONE SHOT•INTERVAL”.

4 Press the REC button.

•One-shot recording will be on STANDBY mode. Interval recording begins recording with the preset interval time. 5 To start One-shot recording, press the REC button or switch the REC IN terminal on the rear panel to ground.

SYNCHRONOUS RECORDING

A number of camera images can be mixed together through a camera switcher and then recorded separately onto several VCRs. A camera is assigned to each VCR with the VCR recording only the camera image it has been assigned. This allows recording without gaps.

If you have three VCRs, the video signal from three cameras can be recorded separately by connecting the switcher as shown below.

V-SYNC

SWITCHER/ switching cameras

/ recording start signal

CAMERA1 CAMERA2 CAMERA3 CAMERA4 CAMERA5 CAMERA1 CAMERA2 CAMERA3 CAMERA4 CAMERA5

VCR 1	/ recording
	/ clock out
VCR 2	/ recording
	/ clock out
VCR 3	/ recording
	/ clock out
VCR 4	/ recording
	/ clock out
VCR 5	/ recording
	/ clock out

REC

REC REC

Connection:

CAMERA 1

CAMERA 2

CAMERA 3

CAMERA 4

CAMERA 5

	VIDEO IN	VCR1
		VCR1
	SWITCHER	VCR2
	SWITCHER
		VCR3
CAMERAS		VCR4
		VCR5

CLK OUT

REC IN CLK OUT

REC IN

Set the “REC IN” of “REAR TERMINAL” menu to “SERIES” or “REC-START/STOP” on VCR1. Set the “CLOCK OUT” of “REAR TERMINAL” menu to “T/L-REC” and “F” on VCR1.

Set the “REC IN” of “REAR TERMINAL” menu to “SYNC REC” on all VCRs except VCR1.

•If recording start signal is available on switcher, set the “REC IN” of the “REAR TERMINAL” menu to “SYNC REC” on VCR1. Then, VCR1 will always record the picture from CAMERA1.

•You must set the recording mode to L12H or L24H mode.

•The suitable numbers of VCRs and cameras are shown in the table.

Recording mode	VCR	Camera
L12H	5	Multiple of 5
L24H	9	Multiple of 9	18
			18