Mitsubishi Electronics HS-S8300E(BRS) Adjustment During Playback, Tracking Adjustment

Page 27

ADJUSTMENT DURING PLAYBACK

TRACKING ADJUSTMENT

If noise appears in the picture during playback, fast playback, reverse playback or forward/reverse slow playback, adjust the TRACKING buttons to achieve the best picture.

If noise appears

 

 

POSITION/

 

 

POSITION/

TRACKING VERTICAL

TRACKING VERTICAL

 

 

ADJUST

 

 

ADJUST

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For tracking adjustment at fast playback, reverse playback or forward/reverse slow playback mode, press the PAUSE/SHUTTLE HOLD button while turning and holding the SHUTTLE ring.

When pressing the TRACKING (+) and (-) buttons at the same time during playback, reverse playback or forward/reverse slow playback, the tracking is set to the initial setting.

N

•When in reverse playback or reverse slow mode, noise bars may appear on the screen.

•Noise bars will move continuously through the picture when a TRACKING button is pressed and held (except in L12H or L24H playback mode).

•Noise bars will move through the picture each time the TRACKING button is pressed (in L12H or L24H playback mode).

•When a picture recorded in 3H mode is played back in L12H or L24H mode, noise may appear on the screen even though adjusted with the TRACKING button.

PICTURE QUALITY ADJUSTMENT

This control allows you to adjust the playback picture so that the outline is sharper or softer.

SOFT

PICTURE

SHARP

 

 

 

SOFT

SHARP

 

N

• This control is only effective during playback.

VERTICAL ADJUSTMENT (Correcting picture vibration at the top and bottom)

The picture vibration can be reduced or eliminated by the following steps.

1If the vibration occurs in still, slow motion, fast playback (x2) or normal playback in 24H - 960H or 0H mode, playback a tape which is recorded in 3H mode with this VCR and press the PAUSE button.

If the vibration occurs during normal playback in L12H or L24H mode, playback a tape in each playback mode.

2Press the VERTICAL ADJUST (+) or (-) button to reduce or eliminate the picture vibration.

When the picture is vibrating

 

 

POSITION/

 

 

POSITION

TRACKING VERTICAL

TRACKING VRTTICAL

 

 

ADJUST

 

 

ADJUST

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N

•Horizontal vibration cannot be corrected with the VERTICAL ADJUST buttons.

•When the VERTICAL ADJUST (+) and (-) buttons are pressed at the same time during still playback, the VERTICAL ADJUST is set to initial setting.

•When QUASI V-SYNC is set to “OFF”, the picture vibration is not adjustable with the VERTICAL ADJUST buttons.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents VHS HS-S8300EBRSUnplugging the Mains Lead When not in USEInstallation Location Condensation is the Enemy of Video RecordersFeatures ContentsFeatures and Functions Front ViewFluorescent display Fluorescent Display RECFeatures and Functions Reset buttonRear View Sensor Connecting with Other EquipmentSetting the Menus Present time display will appearPresent Time Display Timer Program DisplayTime Date Search Setting the Menus Recording SET UPRear Terminal Maintenance First Time SET UP Setting the Present Time Display modeFRI Setting the Present Time to the Exact Second Setting the Present TimePreventing Accidental Erasure Loading and Unloading the Cassette TapeLoading UnloadingRecording Check Function REC ModeLock Mode Manual RecordingRecommended Number of Tape USE Stop Rewind Repeat AlarmprotRepeat Recording Number of Tape USE Repeat REC TimesConnection Manual RecordingONE SHOT/INTERVAL Recording Synchronous RecordingAdditional Features Timer Recording Symptom Fault Action Order to Avoid Mistakes When Using the Timer1st VCR Alarm RecordingAlarm Recording Connection External Time Clock AdjustmentEmergency Recording Setting for Alarm RecordingIndex Search Alarm RecordingAlarm Record Time Display Locating the Start of Alarm RecordingsPlayback Mode PlaybackAudio Playback Still Picture Special Effects PlaybackShuttle Ring Direct Shuttle RingWhen the picture is vibrating Adjustment During PlaybackTracking Adjustment Picture Quality AdjustmentUsing with the Personal Computer Configuring the Time Lapse VCRConnecting the VCR to a personal computer Setting Stop BIT Length RS-232C SettingSetting Transmission Rate Setting Data BIT LengthPhysical protocol of RS-232C Using with the Personal ComputerConnecting to a Personal Computer Data Communications SettingsCommand carried out Command Commands sent to the VCR FormatPower on command Command receivedCommand carried out VCR02 Command ParameterCommand for fast forwarding VCR02 Command received VCR02Commands and Responses 171=TIME Date Adjust + STOP=0, REWIND=1, REPEAT=2 +0=SERIES, 1=REC-START/STOP =SYNC REC Error codesDisplay Self Diagnostic FunctionFluorescent Monitor Cause Remedy To Turn OFF the IndicationBefore Calling for Service Symptom RemedyIs the Lock indicator illuminated? Control INPUT/OUTPUT Signals and Circuits Control INPUT/OUTPUT Signals and Circuits CircuitLabel B-7 Connectors Specifications872C193C3
Top Page Image Contents