USING WITH THE PERSONAL COMPUTER
CONFIGURING THE TIME LAPSE VCR
NBefore connecting the hardware, unplug the power cord of the VCR from the wall outlet, and turn the personal computer power off.
1Connecting the VCR to a personal computer.
Personal computer
IN
| SET | RST REC | GND ALM MODE | CLK | CALL | |
|
| IN |
| OUT | RESET |
|
|
|
|
|
| IN | OUT |
|
|
|
|
|
| |
ÉMIC | IN | OUT | IN |
| REMOTE |
|
|
| AUDIO | VIDEO | OUT |
|
a.Connect the
b.Connect the other end of cable to
N
•Refer to page 30 for the
To
To
IN terminal
OUT
2Connecting multiple VCRs to a personal computer.
Up to 16 VCRs may be controlled either individually or as a group. To do this, connect the VCRs in series through the
Personal computer
1st VCR
2nd VCR
16th VCR
To
To
IN
To
OUT
To
IN
To
OUT
To
To
To
IN
a.Connect the
b.Connect the other end of the cable to the RS- 232C IN terminal to the 1st VCR.
c.Connect the end of the
d.Continue this process until the last (up to 16) VCR is connected.
N
•
OUT
28