Mitsubishi Electronics HS-S8300E(BRS) Order to Avoid Mistakes When Using the Timer

Page 21

SETTING THE RECORDING PERIOD BY SPECIFYING THE DAYS OF THE WEEK (SPECIAL DW)

Set the recording period by specifying the start and end day of the week for timer recording.

1.Display the “TIMER PROGRAM” setting display.

2.Turn the JOG dial to select “SPECIAL DW” and turn the SHUTTLE ring to the right.

3.Turn the JOG dial to set the start day and turn the SHUTTLE ring to the right.

4.Turn the JOG dial to set the end day and turn the SHUTTLE ring to the right.

• The start and end day cannot be set to the same day.

IN ORDER TO AVOID MISTAKES WHEN USING THE TIMER

If an error is encountered when the TIMER REC button is pressed, refer to the following table.

	Symptom		Fault				Action

		•	A tape is not inserted.	1.	Press the TIMER REC button.
		•	A tape is not inserted.	2.	Correctly set the timer program.
	TIMER REC indicator flashes.	•	A tape with the erasure prevention tab	2.	Correctly set the timer program.
	TIMER REC indicator flashes.	•	A tape with the erasure prevention tab	3.	Press the TIMER REC button and
			removed is loaded.	3.	Press the TIMER REC button and
			removed is loaded.		confirm the TIMER REC indicator
		•	Date, time or timer recording time is not set.		confirm the TIMER REC indicator
		•	Date, time or timer recording time is not set.		(		) is illuminated.
		•	A menu is being set.

21

Image 21

Contents VHS HS-S8300EBRSInstallation Location When not in USECondensation is the Enemy of Video Recorders Unplugging the Mains LeadFeatures ContentsFeatures and Functions Front ViewFluorescent display Fluorescent Display RECFeatures and Functions Reset buttonRear View Sensor Connecting with Other EquipmentSetting the Menus Present time display will appearPresent Time Display Timer Program DisplayTime Date Search Setting the Menus Recording SET UPRear Terminal Maintenance First Time SET UP Setting the Present Time Display modeFRI Setting the Present Time to the Exact Second Setting the Present TimeLoading Loading and Unloading the Cassette TapeUnloading Preventing Accidental ErasureLock Mode REC ModeManual Recording Recording Check FunctionRepeat Recording Stop Rewind Repeat AlarmprotNumber of Tape USE Repeat REC Times Recommended Number of Tape USEONE SHOT/INTERVAL Recording Manual RecordingSynchronous Recording ConnectionAdditional Features Timer Recording Symptom Fault Action Order to Avoid Mistakes When Using the TimerAlarm Recording Connection Alarm RecordingExternal Time Clock Adjustment 1st VCREmergency Recording Setting for Alarm RecordingAlarm Record Time Display Alarm RecordingLocating the Start of Alarm Recordings Index SearchPlayback Mode PlaybackAudio Playback Shuttle Ring Special Effects PlaybackDirect Shuttle Ring Still PictureTracking Adjustment Adjustment During PlaybackPicture Quality Adjustment When the picture is vibratingUsing with the Personal Computer Configuring the Time Lapse VCRConnecting the VCR to a personal computer Setting Transmission Rate RS-232C SettingSetting Data BIT Length Setting Stop BIT LengthConnecting to a Personal Computer Using with the Personal ComputerData Communications Settings Physical protocol of RS-232CPower on command Command Commands sent to the VCR FormatCommand received Command carried outCommand for fast forwarding VCR02 Command ParameterCommand received VCR02 Command carried out VCR02Commands and Responses 171=TIME Date Adjust + STOP=0, REWIND=1, REPEAT=2 +0=SERIES, 1=REC-START/STOP =SYNC REC Error codesFluorescent Monitor Self Diagnostic FunctionCause Remedy To Turn OFF the Indication DisplayBefore Calling for Service Symptom RemedyIs the Lock indicator illuminated? Control INPUT/OUTPUT Signals and Circuits Control INPUT/OUTPUT Signals and Circuits CircuitLabel B-7 Connectors Specifications872C193C3