RS-232C SETTING
Set the
1Press the DISPLAY button to display MAIN MENU.
• “MAIN MENU” will appear.
2Turn the JOG dial to select “FIRST TIME SET UP”.
3Turn the SHUTTLE ring to the right .
• “FIRST TIME SET UP” menu will appear.
<MAIN MENU>
DISPLAY
TIME DATE SEARCH TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE FIRST TIME SET UP Use JOG to select, and ENTER.
Press DISPLAY to exit.
<MAIN MENU>
DISPLAY
TIME DATE SEARCH TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE
FIRST TIME SET UP Use JOG to select, and ENTER.
Press DISPLAY to exit.
4Turn the JOG dial to select
•If
N
•If the
5Turn the SHUTTLE ring to the right .
•
Select the parameter to be changed by using the SHUTTLE ring. Change its value using the JOG dial and then use the SHUTTLE ring to store the new value.
<FIRST TIME SET UP> |
| STOP |
TAPE END |
| |
QUASI |
| ON |
TAPE LENGTH |
| |
VIDEO MODE | COLOUR | |
PB HEAD SELECT | NORMAL | |
BUZZER |
| WRNG |
TIME DATE ADJUST |
|
|
|
| |
|
|
|
|
|
|
| 1200 | |
TRANSMISSION RATE |
| |
DATA BIT LENGTH |
| 8BIT |
STOP BIT LENGTH |
| 1BIT |
PARITY BIT |
| NONE |
DELIMITTER<SEND> |
| CR |
DELIMITTER<RECEIVE> | CR | |
VCR ADDRESS |
| NONE |
|
|
|
1SETTING TRANSMISSION RATE
When the JOG dial is turned to the right, the display will be switched in the order of 1200(bps) } 2400(bps) } 4800(bps) }9600(bps) } 1200(bps) } ....
2SETTING DATA BIT LENGTH
When the JOG dial is turned to the right, the display will be switched in the order of 8 BIT } 7 BIT } 8 BIT } ....
3SETTING STOP BIT LENGTH
When the JOG dial is turned to the right, the display will be switched in the order of 1 BIT } 2 BIT } 1 BIT } ....
4SETTING PARITY BIT
When the JOG dial is turned to the right, the display will be switched in the order of NONE } ODD } EVEN} NONE } ....
N
•The Parity bit cannot be used when the DATA BIT LENGTH is set to 8.
5SETTING DELIMITER<SEND> (Setting a character marking the end of a command.)
When the JOG dial is turned to the right, the display will be switched in the order of CR } CR•LF } CR } ....
6SETTING DELIMITTER<RECEIVE> (Setting a character marking the end of a status or error code.) When the JOG dial is turned to the right, the display will be switched in the order of CR } CR•LF } CR } ....
7SETTING VCR ADDRESS (Setting the ID number of the VCR)
When the JOG dial is turned to the right, the screen display will be switched in the order of NONE } VCR01 } VCR02} VCR03 } ... } VCR14 } VCR15 } VCR16} NONE } ....
•When controlling only one VCR via the personal computer, “VCR ADDRESS” is set to “NONE”.
•When two or more VCRs are to be controlled in series, each VCR must have a unique VCR ADDRESS (from VCR01 to VCR16).
N
•Set the communications parameters (items 1 - 6 above) to the same values as the controlling personal computer or other equipment. Each VCR must have the same settings when multiple VCRs are connected.
29