Mitsubishi Electronics HS-S8300E(BRS) Command Commands sent to the VCR Format, Parameter

Page 31

The commands sent from the personal computer (or other equipment) to the VCR and responses produced by the VCR are detailed in this section.

1When controlling only one VCR via the personal computer, the "VCR ADDRESS" is set to "NONE". (Refer to page 29, item 7.)

1. Command:

Commands sent to the VCR.

Format:	Command			Parameter		,				Parameter
Format:	Codes		1			,			2
	Codes		1						2
2. Status:	Response codes from the VCR.

Format:	Status			Parameter			,			Parameter
Format:	Status			1			,			2
				1						2

,

,

• • • • •

• • • • •

,

,

Parameter

n

Parameter

n

Delimitter

#1

Delimitter

#2

N

#1: When you set "DELIMITTER<RECEIVE> to "CR", input the carriage return code (0DH).

When you set "DELIMITTER<RECEIVE> to "CR • LF", input the carriage return code (0DH) and line feed code (0AH).

#2: When you set "DELIMITTER<SEND> to "CR", the carriage return code (0DH) will be inputted.

When you set "DELIMITTER<SEND> to "CR • LF", the carriage return code (0DH) and line feed code (0AH) will be inputted.

[Example 1] Switch on the VCR. (When the DELIMITTER<SEND> and DELIMITTER<RECEIVE> of the RS-232C menu is set to CR.)

	Sending commands	Status or error code from	Meaning
	from the PC etc.	the VCR to PC etc.	Meaning
	from the PC etc.	the VCR to PC etc.
	PW1 CR		Power ON command
		RC CR	Command received
		EX CR	Command carried out

•

CR , which indicates carriage return code (0DH).

[Example 2] Recording was attempted, but could not because the erasure prevention tab of the tape was broken. (When the DELIMITTER<SEND> and DELIMITTER<RECEIVE> of the RS-232C menu is set to CR.)

	Sending commands	Status or error code from	Meaning
	from the PC etc.	the VCR to PC etc.	Meaning
	from the PC etc.	the VCR to PC etc.
	RC CR		Command for recording
		RC CR	Command received
		ER02 CR	Failed because the erasure prevention
			tab of the tape is broken.

•CR , which indicates carriage return code (0DH).

31

Image 31

Contents VHS HS-S8300EBRSUnplugging the Mains Lead When not in USEInstallation Location Condensation is the Enemy of Video RecordersFeatures ContentsFront View Features and FunctionsFluorescent display Fluorescent Display RECReset button Features and FunctionsRear View Sensor Connecting with Other EquipmentPresent time display will appear Setting the MenusPresent Time Display Display Timer ProgramTime Date Search Recording SET UP Setting the MenusRear Terminal Maintenance First Time SET UP Display mode Setting the Present TimeFRI Setting the Present Time to the Exact Second Setting the Present TimePreventing Accidental Erasure Loading and Unloading the Cassette TapeLoading UnloadingRecording Check Function REC ModeLock Mode Manual RecordingRecommended Number of Tape USE Stop Rewind Repeat AlarmprotRepeat Recording Number of Tape USE Repeat REC TimesConnection Manual RecordingONE SHOT/INTERVAL Recording Synchronous RecordingAdditional Features Timer Recording Symptom Fault Action Order to Avoid Mistakes When Using the Timer1st VCR Alarm RecordingAlarm Recording Connection External Time Clock AdjustmentEmergency Recording Setting for Alarm RecordingIndex Search Alarm RecordingAlarm Record Time Display Locating the Start of Alarm RecordingsPlayback Playback ModeAudio Playback Still Picture Special Effects PlaybackShuttle Ring Direct Shuttle RingWhen the picture is vibrating Adjustment During PlaybackTracking Adjustment Picture Quality AdjustmentConfiguring the Time Lapse VCR Using with the Personal ComputerConnecting the VCR to a personal computer Setting Stop BIT Length RS-232C SettingSetting Transmission Rate Setting Data BIT LengthPhysical protocol of RS-232C Using with the Personal ComputerConnecting to a Personal Computer Data Communications SettingsCommand carried out Command Commands sent to the VCR FormatPower on command Command receivedCommand carried out VCR02 Command ParameterCommand for fast forwarding VCR02 Command received VCR02Commands and Responses 171=TIME Date Adjust + STOP=0, REWIND=1, REPEAT=2 +0=SERIES, 1=REC-START/STOP =SYNC REC Error codesDisplay Self Diagnostic FunctionFluorescent Monitor Cause Remedy To Turn OFF the IndicationSymptom Remedy Before Calling for ServiceIs the Lock indicator illuminated? Control INPUT/OUTPUT Signals and Circuits Circuit Control INPUT/OUTPUT Signals and CircuitsLabel B-7 Connectors Specifications872C193C3