Mitsubishi Electronics DX-TL5000U Basic playback, Repeatedly. See, To change the playback device

Page 102

Basic operations (continued)

Basic playback

This function is used to playback recorded data. This unit allows recorded data to be played back using various meth- ods. The basic playback described below is the most com- mon method for playback.

step1. Press the PLAY button inside of the front door.

•Playback starts.

•After turning the power on, the oldest recording data is played back first. Otherwise, playback resumes at the stopped position of the previous playback spot.

STOP PAUSE REV. PLAY PLAY

JUMP TO END

 

SPEED

 

•When the “Playback Device Repeat Setting” (System Menu Memory Recording Data Readout Setting) is set to “Repeat Off,” playback stops when reaching the physical end of the HDD or end point of the recording section. When the “Playback Device Repeat Setting” is set to “Repeat On,” recorded data is played back

repeatedly. ( See page 83.)

(To change the playback device:)

step2-1.Select the playback device and playback area in the <Select Source Device> (User MenuSearchSelect Source Device).

Main: Plays back the contents from the main HDD device.

Normal: Normal recording area

Alarm: Alarm recording area

LPA: Long pre-alarm recording area

Copy 1: Plays back the recorded contents of the copy 1 device.

“SerialBus,” “NAS,” “SCSI,” “DVD/CD,” “USBMemory”

Copy 2: Plays back the recorded contents of the copy 2 device.

“SerialBus,” “NAS,” “SCSI,” “DVD/CD”

step4. To stop playback, press the STOP button.

•When executing playback again, the playback starts from the stopped position of the previous playback.

•Pressing the OUTPUT A/B button on the front panel switches the multiplexer video output. When OUTPUT A is selected, the button light indicator is off. When OUTPUT B is selected, the button light indicator is on, and the buttons related to playback function are operated for the monitor screen connected to the OUTPUT B connector. Pressing the OUTPUT A/B button again switches the multiplexer output to

OUTPUT A.

•The playback of each camera may vary in speed depending on the recorded condition.

•During the split screen display, the playback speed may be slower than the speed used for recording.

•When playing back on both OUTPUT A and B, the playback speed may be affected and become slower.

•“Alarm” appears when “Alarm Recording Area” (System MenuMemoryData Management Setting for Main MemoryChange Partition Setting) is set to other than “0 %.”

•“LPA” appears when “Long Pre-Alarm Area” (System MenuMemoryData Management Setting for Main MemoryChange Partition Setting) is set to other than “0 %.”

step2-2.Press the PLAY button.

•Playback of the selected device starts.

•When you press the PAUSE/JUMP TO END button during the playback is stopped, the still frame playback picture around the end point of the latest recording is displayed.

step3. To pause playback, press the PAUSE button.

•To resume playback, press the PAUSE button again or press the PLAY button.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

98

Page 101 Page 103
Image 102
Page 101 Page 103
Contents DX-TL5000U Page Avertissement BeginningImportant safeguards IiiSafety Check Damage requiring ServiceReplacement Parts ServicingUnplug the Power Cord During a Long Absence Recordable time and product warranty Installation Location and Handling Beginning Features Beginning Contents 80-83 System Menu74-76 85-89Flowchart Flowchart for connection and settingsTimer recording is executed and completed Setting the motion detectionSetting the timer recording Searching the recorded dataMajor operations and their functions Camera control buttons Busy indicatorDET DOT ON/OFF/M-DET Area SET UP Camera Number 9 Output A/B buttonSET UP button Power buttonAnalogue Output connectors Timer buttonCamera connectors Main switchAC power socket Video Cascade connectorsReset button Alarm in terminalsAlarm OUT terminals 16. RS485 IN/OUT connectorsConnecting to Cctv camera, monitor, and sensor ConnectionsConnections Alarm recording connection Cascade connection Keyboard DX-KB5UEPrecautions for attaching or removing the HDD Attaching or removing the HDDDisconnect the cables Remove the front covers When removing a HDDRemove the metal part Remove the HDD trayWhen attaching a HDD Attach the new HDD onto the HDD tray with four screwsFix the metal part with four screws Attach the front covers Page Connecting to an analogue video cassette recorder Clamping the cablesOptional items Recommended itemsAttaching the optional board Setting the menu using a mouse Setting a mouse How to set the menusSetting the menus Setting a menu with a mouseDisplaying a menu screen Closing a menu screenSelecting an item Setting parameters Using the front buttons of the unitUsing a mouse For some items, more detailed setting is requiredSymbols in the menus Address number using the front buttons of the unitSetup wizard is displayed when the unit is turned on Setup WizardSetup Wizard For the first time. The Wizard enables a quick setupSelect whether or not to make the recording settings Set the HDD configurationWhen selecting Partition Set the desired partition capacity When selecting NextMenu chart Menu chartAudio Menu chartFunctions ExitMenu chart Functions Pages RecordingEasy + D Set 213 2ED Exit Exits the Recording menu Multiplexer Setting Option COM/LAN Functions Pages Service Info Functions Pages Next MemoryData Clear Search Select Search Operations Search by MotionSet the motion detection conditions for playback Steps 1, 2Copy Data to Copy 1 Drive/Set Copy 1 Drive Select Other settings and then set the detailed settingsCopy Copy Data to Copy 2 Drive/Set Copy 2 DriveCopying the data of this unit to a video cassette Set the start time of copyStarting up the application software Playback softwareSystem requirements Operational panelBookmark menu Search menuOperation menu View menuAudio Information/AudioInformation Main deviceSet the start and end points of the data to be locked Protect DataProtect Data See page 88 for registering a book mark Select ProtectPTZ control using the menu PTZ control using the front panel buttonsPTZ Control Pre-alarm recording Settings concerning normal recording and alarm recordingSet Recording Pattern a Normal/Timer to D Timer RecordingSet the alarm mode Normal recording settingsAlarm recording settings Set the pre-alarm recording time in Pre-Alarm DurationAlarm Input Set the PTZ camera presetAlarm recording Set the recording camera for each sensor connectedLong pre-alarm recording Emergency Recording SetupCamera Setting RecordingAlarm area with the picture. See Operations Audio Recording SetupSet the audio recording mode Set the audio recording for each camera from 1 toSetting the program TimerTimer Carrying out timer recordingOverlapped timer settings ExampleMotion Det Set the reference interval timeSteps 1, 3, 4, 5 Color of the dot detecting motion changes System Time/Date SettingRear Terminal Setting Menu Language SelectionCall Out Settings Key SoundBuzzer Password Setting Releasing the Password Lock For the levels 1 For the disk management passwordActivating the Password Lock Changing the PasswordSplit buttons operations To cancel the sequential displayCamera number button operations Sequence button operationsOperations Split screen Multiplexer SettingOutput a Settings Single sequential screen Sequence SingleOutput B Settings Covert Camera Setting Alarm Display SettingSet the covert camera setting for each camera number Select output a or output BClock On Screen Display SettingOn Screen Information CameraAudio Setting Monitor Output AdjustRecorder Title Reset to Factory Setting This item is used to reset the menu settingsMenu Data Load Menu DataSave Menu Data Select the sharpness setting XGA Monitor SettingsSelect the display mode of the XGA output OptionRS-232C Setting RS-485 Cascade SettingLAN B Communication Setting Select Return in the screen of LAN a NAS Setting LAN a NAS SettingLAN a Address Setting Device InformationPTZ Setting PTZ Camera ConfigurationConfiguration Check List Elapsed Operating Time Service InfoSystem Log List Disk InformationRestore Set the camera number to be restoredSet the other detailed settings Internal HDD MemoryAdd/Remove HDD Device External HDDAttaching the HDD and setting the ID number Scsi ID0 Scsi ID1 Scsi ID2 Scsi ID3 Scsi ID4 Scsi ID5Change Partition Setting Data Management Setting for Main MemoryMain Device Repeat Settings Add/Remove DVD/CD DriveImage Originality Check Play Recording Data Readout SettingPlayback Device Repeat Setting Auto-Expire on Specified DateCopy 1/Copy Data ClearMain Storage Memory Deleting the data of the DVD takes about 30 or 40 minutesOther convenient functions CascadeTo control the other recorder, repeat steps 1 and 2 above Various playback functions Simultaneous playback during recording Playback the latest recorded contentsChanging playback intervals Triplex playbackRegistering the picture Registering a book markPicture copy Power failure reset recording Functions of the unit in case of power failurePower failure compensation circuit System Log List. SeeOperation examples Operation exampleSet the normal and alarm recording areas Performs alarm recording at the specified recording rateSettings Alarm area settings see Repeat recording settings seeMotion detection settings see pages 58 Set the motion detection settings for Motion BTimer recording settings see pages 56 Set the timer program number to ProgramSet the motion detection settings for Motion a and Motion B Active Monday Friday Digital Zoom button Basic operationsBasic multiplexer functions Split screen buttonsBasic manual recording To change the playback device Basic playbackRepeatedly. See To stop playback, press the Stop buttonBasic search Search by Time and DateSearch by Alarm List 100101 LoginCommunications by Web Browser Communications by Web Browser102 Main Menu103 Live MonitoringTime Search 104Playback Select the date and time and click Search105 Alarm List SearchConfiguration Menu Image SearchWhen you have selected cancel If you have selected cancel106 Recorder Title & Camera Titles Mail Setup107 Select change and left-clickClock Setup NAS SetupSelect NAS Setup and left-click 108Logout Change Login User109 Close the Web BrowserContinuous recording time table Recording time table110 Without audio recording111 Troubleshooting 112113 Others114 Countermeasure Log number output115 Call OUTCheck sheet Setup Menu 200 000Recording Set Recording Pattern a Normal/Timer 116117 Check sheetSet Recording Pattern B Timer 118119 Set Recording Pattern C Timer 120121 Set Recording Pattern D Timer 122123 Timer Configure Timer Program Emergency Recording SetupAudio Recording Setup 124Define Holidays Default125 Motion Det126 Rear Terminal SettingPassword Setting System Menu Language Selection127 Multiplexer SettingOutput a Settings Sequence MultiAlarm Display Setting Output a Output B SettingsAlarm Display Setting Output Setting 128Alarm Display Setting Output B Covert Camera Setting129 On Screen Display Setting Audio Setting130 131 System Menu 300 000Port Pan PTZ Setting PTZ Camera Configuration132 Device ID133 Memory Add/Remove HDD DeviceSelect using for Copy1 or Copy2 134Add/Remove DVD/CD Drive Data Management Setting for Main Memory Recording Data Readout Setting135 Glossary 136Glossary 137 GlossarySpecifications Specifications138 872C355B2
Related manuals
Manual 40 pages 7.44 Kb Manual 8 pages 45.69 Kb
Top Page Image Contents