Search by Motion
Picture recorded via motion detection can be searched by specifying the motion detection conditions. For this func- tion, the camera number and start time needs to be speci- fied to search. The search result is displayed in frame still playback of the single screen display.
User Menu
1 Search
steps 1, 2, 4
6 Search by Motion
step 3
B Motion Detection Settings
A + D Motion Mask Setting
step1. Set the camera number to be searched. step2. Set the time for start searching.
•To search from the oldest recording point, select “Oldest.”
•When the search start point is set to the earlier time than the recording start point, the search is executed from the oldest recording point.
step3. Set the motion detection conditions for playback.
•Set motion mask setting, sensitivity, and motion
threshold.
See pages 58 and 59 for the details of these settings.
•The sensitivity of motion detection conditions for playback has two setting items, “Low” and “High.”
•The motion detection settings for recording (Motion A or B) can be copied. To copy the settings for recording, display the desired setting in “Same as Recording Setting” and then select “same.” The sensitivity setting for playback is set to “High” when the setting for recording of “High,” “Mid High,” or “Mid” is copied, and is set to “Low” when the setting for recording of “Mid Low” or “Low” is copied.
step4. Select “Search.”
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
43