Mitsubishi Electronics DX-TL5000U instruction manual 103, Live Monitoring

Page 107

Live Monitoring

Retrieves live pictures and displays the pictures on the PC screen.

1.Select “Live Monitoring” and left-click.

• The “[Live]” screen appears.

•When picture acquisition is tried for the first time with the Web browser of a personal computer, a message as shown below will be displayed. Please click “Yes.”

•When the unit is recording at the full rate (240 pps), the picture supplied from the camera which is not used for recording at that time is not updated.

<Function description>

STOP	: Stops the retrieval of an picture.
GO	: Starts (or restarts) the retrieval of an
	picture.
Display	: For selecting either the display or
	non-display of a camera number.
Layout	: For selecting from the 12 types of
	display patterns.
	(default: 4(1-4) screen)
Camera	: Selects the camera number that you
	want to display and check.
Transfer Rate	: Selects one of 5 stages from “Lo” to
	“Hi” for picture retrieval speed.
	(default: middle)
Save Layout	: The layout of the screen display is
	registered to “Local PC.”
Main Menu	: Returns to the “Main Menu.”
Logout	: For logging out.

•The sequence in which camera numbers have been selected is displayed from the top left.

•Setting “Transfer Rate” too far on “Hi” may present a problem to the PC operations. This could be due to the PC’s hardware/software performance you are using. Please adjust the image transfer rate that best meets your machine.

•Depending on the network capacity and the load conditions, the transfer rate may be affected.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Communications by Web Browser

103

Image 107

Contents DX-TL5000U Page Beginning AvertissementIii Important safeguardsServicing Damage requiring ServiceReplacement Parts Safety CheckUnplug the Power Cord During a Long Absence Recordable time and product warranty Installation Location and Handling Beginning Features Beginning Contents 85-89 System Menu74-76 80-83Flowchart for connection and settings FlowchartSearching the recorded data Setting the motion detectionSetting the timer recording Timer recording is executed and completedMajor operations and their functions Output A/B button Busy indicatorDET DOT ON/OFF/M-DET Area SET UP Camera Number 9 Camera control buttonsTimer button Power buttonAnalogue Output connectors SET UP buttonVideo Cascade connectors Main switchAC power socket Camera connectors16. RS485 IN/OUT connectors Alarm in terminalsAlarm OUT terminals Reset buttonConnections Connecting to Cctv camera, monitor, and sensorConnections Alarm recording connection Keyboard DX-KB5UE Cascade connectionAttaching or removing the HDD Precautions for attaching or removing the HDDRemove the HDD tray When removing a HDDRemove the metal part Disconnect the cables Remove the front coversFix the metal part with four screws Attach the front covers When attaching a HDDAttach the new HDD onto the HDD tray with four screws Page Clamping the cables Connecting to an analogue video cassette recorderAttaching the optional board Optional itemsRecommended items Setting a menu with a mouse How to set the menusSetting the menus Setting the menu using a mouse Setting a mouseSelecting an item Displaying a menu screenClosing a menu screen For some items, more detailed setting is required Using the front buttons of the unitUsing a mouse Setting parametersAddress number using the front buttons of the unit Symbols in the menusFor the first time. The Wizard enables a quick setup Setup WizardSetup Wizard Setup wizard is displayed when the unit is turned onWhen selecting Next Set the HDD configurationWhen selecting Partition Set the desired partition capacity Select whether or not to make the recording settingsMenu chart Menu chartExit Menu chartFunctions AudioFunctions Pages Recording Menu chartEasy + D Set 213 2ED Exit Exits the Recording menu Multiplexer Setting Option COM/LAN Functions Pages Service Info Data Clear Functions Pages NextMemory Search Steps 1, 2 Search by MotionSet the motion detection conditions for playback Select Search OperationsCopy Data to Copy 2 Drive/Set Copy 2 Drive Select Other settings and then set the detailed settingsCopy Copy Data to Copy 1 Drive/Set Copy 1 DriveSet the start time of copy Copying the data of this unit to a video cassetteOperational panel Playback softwareSystem requirements Starting up the application softwareView menu Search menuOperation menu Bookmark menuMain device Information/AudioInformation AudioSee page 88 for registering a book mark Select Protect Protect DataProtect Data Set the start and end points of the data to be lockedPTZ Control PTZ control using the menuPTZ control using the front panel buttons Recording Settings concerning normal recording and alarm recordingSet Recording Pattern a Normal/Timer to D Timer Pre-alarm recordingSet the pre-alarm recording time in Pre-Alarm Duration Normal recording settingsAlarm recording settings Set the alarm modeSet the recording camera for each sensor connected Set the PTZ camera presetAlarm recording Alarm InputRecording Emergency Recording SetupCamera Setting Long pre-alarm recordingSet the audio recording for each camera from 1 to Audio Recording SetupSet the audio recording mode Alarm area with the picture. See OperationsCarrying out timer recording TimerTimer Setting the programExample Overlapped timer settingsSteps 1, 3, 4, 5 Motion DetSet the reference interval time Color of the dot detecting motion changes Menu Language Selection Time/Date SettingRear Terminal Setting SystemBuzzer Call Out SettingsKey Sound Password Setting Changing the Password For the disk management passwordActivating the Password Lock Releasing the Password Lock For the levels 1Sequence button operations To cancel the sequential displayCamera number button operations Split buttons operationsOperations Single sequential screen Sequence Single Multiplexer SettingOutput a Settings Split screenOutput B Settings Select output a or output B Alarm Display SettingSet the covert camera setting for each camera number Covert Camera SettingCamera On Screen Display SettingOn Screen Information ClockRecorder Title Audio SettingMonitor Output Adjust This item is used to reset the menu settings Reset to Factory SettingSave Menu Data Menu DataLoad Menu Data Option XGA Monitor SettingsSelect the display mode of the XGA output Select the sharpness settingRS-485 Cascade Setting RS-232C SettingLAN B Communication Setting Device Information LAN a NAS SettingLAN a Address Setting Select Return in the screen of LAN a NAS SettingConfiguration Check List PTZ SettingPTZ Camera Configuration Disk Information Service InfoSystem Log List Elapsed Operating TimeSet the other detailed settings RestoreSet the camera number to be restored External HDD MemoryAdd/Remove HDD Device Internal HDDScsi ID0 Scsi ID1 Scsi ID2 Scsi ID3 Scsi ID4 Scsi ID5 Attaching the HDD and setting the ID numberAdd/Remove DVD/CD Drive Data Management Setting for Main MemoryMain Device Repeat Settings Change Partition SettingAuto-Expire on Specified Date Recording Data Readout SettingPlayback Device Repeat Setting Image Originality Check PlayDeleting the data of the DVD takes about 30 or 40 minutes Data ClearMain Storage Memory Copy 1/CopyTo control the other recorder, repeat steps 1 and 2 above Other convenient functionsCascade Various playback functions Triplex playback Playback the latest recorded contentsChanging playback intervals Simultaneous playback during recordingPicture copy Registering the pictureRegistering a book mark System Log List. See Functions of the unit in case of power failurePower failure compensation circuit Power failure reset recordingOperation example Operation examplesRepeat recording settings see Performs alarm recording at the specified recording rateSettings Alarm area settings see Set the normal and alarm recording areasSet the motion detection settings for Motion B Motion detection settings see pages 58Set the timer program number to Program Timer recording settings see pages 56Set the motion detection settings for Motion a and Motion B Active Monday Friday Split screen buttons Basic operationsBasic multiplexer functions Digital Zoom buttonBasic manual recording To stop playback, press the Stop button Basic playbackRepeatedly. See To change the playback deviceSearch by Time and Date Basic search100 Search by Alarm ListCommunications by Web Browser LoginCommunications by Web Browser 101Main Menu 102Live Monitoring 103Select the date and time and click Search 104Playback Time SearchImage Search Alarm List SearchConfiguration Menu 105106 When you have selected cancelIf you have selected cancel Select change and left-click Mail Setup107 Recorder Title & Camera Titles108 NAS SetupSelect NAS Setup and left-click Clock SetupClose the Web Browser Change Login User109 LogoutWithout audio recording Recording time table110 Continuous recording time table111 112 TroubleshootingOthers 113Countermeasure Log number output 114Call OUT 115116 Setup Menu 200 000Recording Set Recording Pattern a Normal/Timer Check sheetCheck sheet 117118 Set Recording Pattern B Timer119 120 Set Recording Pattern C Timer121 122 Set Recording Pattern D Timer123 124 Emergency Recording SetupAudio Recording Setup Timer Configure Timer ProgramMotion Det Default125 Define HolidaysSystem Menu Language Selection Rear Terminal SettingPassword Setting 126Sequence Multi Multiplexer SettingOutput a Settings 127128 Output B SettingsAlarm Display Setting Output Setting Alarm Display Setting Output a129 Alarm Display Setting Output BCovert Camera Setting 130 On Screen Display SettingAudio Setting System Menu 300 000 131Device ID PTZ Setting PTZ Camera Configuration132 Port PanMemory Add/Remove HDD Device 133Add/Remove DVD/CD Drive Select using for Copy1 or Copy2134 135 Data Management Setting for Main MemoryRecording Data Readout Setting Glossary Glossary136 Glossary 137138 SpecificationsSpecifications 872C355B2

Related manuals

Manual 40 pages 7.44 Kb

Manual 8 pages 45.69 Kb